33ZX dashboard project
#1
Registered
Thread Starter
Join Date: Jul 2003
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
33ZX dashboard project
This winter, in addition to some other modification, I removed my storage box above the glove box and added duplicate gauges for the passenger. If anyone is considering this and I can answer questions, please let me know.
Here are some findings. First I had a second dash cut and powder coated. This was no easy task. (I made two extras cut if interested) I added dual water temp, dual oil pressure and a Speedo. The dual guages require dual sending units. THey will not run off of the stock set up. YOu cannot just wire them to the back of the existing gauges as I was instructed. Also, the Gaffrig Precision (Livorsi) gauges are NOT compatable with Gaffrig Performance.
THe GPS sending unit WILL support a second head being added without a second sending puck.
Here are some findings. First I had a second dash cut and powder coated. This was no easy task. (I made two extras cut if interested) I added dual water temp, dual oil pressure and a Speedo. The dual guages require dual sending units. THey will not run off of the stock set up. YOu cannot just wire them to the back of the existing gauges as I was instructed. Also, the Gaffrig Precision (Livorsi) gauges are NOT compatable with Gaffrig Performance.
THe GPS sending unit WILL support a second head being added without a second sending puck.
Thread
Thread Starter
Forum
Replies
Last Post
Qball
General Boating Discussion
1
11-20-2003 09:45 AM