32 Dw
10-19-2007 | 09:52 PM
#41
Registered
Joined: Jun 2006
Posts: 2,057
Likes: 0
just as a point of info, i had a 328 race skater (which is now on lake cumberlands website) with 2.5s , and while it had better acceleration (60-100 mph) than the doug wrights, the max I saw out of it was 108mph. great boat in the rough though
10-20-2007 | 09:32 AM
#43
Registered
Joined: Jul 2004
Posts: 7,152
Likes: 13
From: Toms River, NJ
GIT-R-DONE
i've been known to wheel an outboard cat in the bump once or twice !! Tantrum or DPT can verify that !!
Last edited by berns29scarab; 10-20-2007 at 09:33 AM. Reason: add'l info
10-21-2007 | 08:26 PM
#44
LOOK AT THE LEAD NOW!!!!!
Joined: Mar 2002
Posts: 3,967
Likes: 1
From: Beachwood, NJ
PUT ME IN COACH!!!!!! I have been a DW supporter since I met him in NYC with GB. I know some history on DW that is really sweet knowledge to me. More to do with what he was doing before he was building boats. Let's just say I had a few of his designs before the boats even came into play.
I became an even bigger supporter when I got to crawl inside one of his masterpieces and to date my favorite boat that he has built. That boat being DL's LOAN SHARK. in race trim and in pleasure trim. By far the BEST outboard powered cats on the water. PERIOD!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!
I became an even bigger supporter when I got to crawl inside one of his masterpieces and to date my favorite boat that he has built. That boat being DL's LOAN SHARK. in race trim and in pleasure trim. By far the BEST outboard powered cats on the water. PERIOD!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!
10-22-2007 | 08:12 AM
#47
Registered
Joined: Oct 2003
Posts: 446
Likes: 0
From: sarasota,fl
Sarasota was 3ft this week-end. Too much fun to run in unfortunately no one was out in the gulf but me.
I will be in Key West for sure.
Its up in the air currently if LS will make the trip. This will be a great event.
I will be in Key West for sure.
Its up in the air currently if LS will make the trip. This will be a great event.
10-22-2007 | 11:47 AM
#48
Registered
Joined: Jul 2004
Posts: 7,152
Likes: 13
From: Toms River, NJ
Im flying into Miami, Thursday landing at like 2pm and will have a rental car waiting at airport...and we fly out of Miami monday late afternoon
11-13-2007 | 07:56 AM
#49
Registered
Joined: Oct 2003
Posts: 446
Likes: 0
From: sarasota,fl
speed update
Speed update for LS
82 degrees outside. 81 water temp.
113mph @ 6,300 stb and 6270port with 35lbs water pressure and 45 gallons of fuel.
stock 15/34 cleavers bblades standard thickness with trailing edge work.
Next stop will be bblades for some 36's.
I believe that the boat will see over 118 again.
We will have to wait for the next update as I am taking the boat in for a re-rig and some updating on the interior.
Dan
82 degrees outside. 81 water temp.
113mph @ 6,300 stb and 6270port with 35lbs water pressure and 45 gallons of fuel.
stock 15/34 cleavers bblades standard thickness with trailing edge work.
Next stop will be bblades for some 36's.
I believe that the boat will see over 118 again.
We will have to wait for the next update as I am taking the boat in for a re-rig and some updating on the interior.
Dan
11-13-2007 | 09:35 AM
#50
Gold Member
Joined: Oct 2000
Posts: 2,116
Likes: 1
From: Port Charlotte, FL
Speed update for LS
82 degrees outside. 81 water temp.
113mph @ 6,300 stb and 6270port with 35lbs water pressure and 45 gallons of fuel.
stock 15/34 cleavers bblades standard thickness with trailing edge work.
Next stop will be bblades for some 36's.
I believe that the boat will see over 118 again.
We will have to wait for the next update as I am taking the boat in for a re-rig and some updating on the interior.
Dan
82 degrees outside. 81 water temp.
113mph @ 6,300 stb and 6270port with 35lbs water pressure and 45 gallons of fuel.
stock 15/34 cleavers bblades standard thickness with trailing edge work.
Next stop will be bblades for some 36's.
I believe that the boat will see over 118 again.
We will have to wait for the next update as I am taking the boat in for a re-rig and some updating on the interior.
Dan
Dan,
That is with 300xs, right?
Your boat really flys. The best mine has ever gone so far it 102.1 with 2 pob and 40 gallons of fuel. It consistantly runs right around 100 with 2-3 pob, 40-60 gal. Thats with 15x32 and I do not make the rpm you make. At this point, I am just enjoying the boat. I may do some more setup and dial-in work next spring.
Lots of tech specs, real world data at http://www.offshoreonly.com/forums/s...=149139&page=8
