Bravo XR Maintenance
#1
Registered
Thread Starter
Join Date: May 2007
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Bravo XR Maintenance
What are the maintenance and service requirements for the Bravo XR ?
- Lube every 50 hours ?
- Gimbal Bearing Greasing ?
- U-joint ?
- U-joint shaft ?
Does the drive have to come off every 50 hours ? Or is 100-150 hours doable ?
How long do you guys really run without taking the drive off ?
What can be done with the drive on ?
What has to be done with the drive off ?
As you can see, I want to remove the drive as little as possible....
- Lube every 50 hours ?
- Gimbal Bearing Greasing ?
- U-joint ?
- U-joint shaft ?
Does the drive have to come off every 50 hours ? Or is 100-150 hours doable ?
How long do you guys really run without taking the drive off ?
What can be done with the drive on ?
What has to be done with the drive off ?
As you can see, I want to remove the drive as little as possible....
#3
Registered
The U-Joints don't require grease (sealed, at least on mine). You should do the drive oil at 50 hours or once a year and pull the drive to grease the drive splines every season. Good time to inspect bearing, bellows, zincs, etc.