Bravo Gear Ratio?
12-23-2008 | 07:25 PM
#2
Charter Member #601
Joined: Dec 2000
Posts: 3,276
Likes: 5
From: Holland, Mi USA.
The old fashion way.. mark the propshaft and turn the input shaft. But you better do it a couple of times. The difference between 1.36 and 1.5, is kind a close.
The other way is to count teeth, but you need to see the lower and upper gears to do it.
Hope this helps.
Dick
The other way is to count teeth, but you need to see the lower and upper gears to do it.
Hope this helps.
Dick
