Bravo 1 or 3?
03-12-2009 | 03:32 PM
#1
Thread Starter
Registered
Joined: Apr 2008
Posts: 44
Likes: 0
From: Don Pedro Island FL.
Bravo 1 or 3?
Is there any guide lines to which unit to use on what type of boat?
I am planning on re powering as soon as my restoration is done.
The boat is a VDH Original Seacraft. 21 feet and total weight with engine is approx. 2800#.
I would think the boat with 300hp should run into the mid 50's.
Any guide lines would be appreciated.
I am planning on re powering as soon as my restoration is done.
The boat is a VDH Original Seacraft. 21 feet and total weight with engine is approx. 2800#.
I would think the boat with 300hp should run into the mid 50's.
Any guide lines would be appreciated.
03-12-2009 | 05:20 PM
#2
Banned
Joined: Oct 2006
Posts: 5,844
Likes: 0
From: Bradenton Florida
Is there any guide lines to which unit to use on what type of boat?
I am planning on re powering as soon as my restoration is done.
The boat is a VDH Original Seacraft. 21 feet and total weight with engine is approx. 2800#.
I would think the boat with 300hp should run into the mid 50's.
Any guide lines would be appreciated.
I am planning on re powering as soon as my restoration is done.
The boat is a VDH Original Seacraft. 21 feet and total weight with engine is approx. 2800#.
I would think the boat with 300hp should run into the mid 50's.
Any guide lines would be appreciated.
A Bravo 3 gives u alot of ecsellaration and u should see 50, with the Bravo 1 ,,,maybe little more top end but lack in handling and ecselaration.
Thread
Thread Starter
Forum
Replies
Last Post
1BIGJIM
Drives and Lower Units
3
06-10-2008 12:46 PM
rslick
General Q & A
13
06-15-2005 11:54 PM
