I posted this question on the Formula site but I don't think these are very common. I have a 99 382 Fastech with extension boxes and Bravo I drives that have SS braided lines for drive temp sensors. The starboard side has been pinched somehow and is beyond repair. Are these a stock Mercury product or will new ones have to be made?

Thanks for any help it looks like crap the way it is and I would like to replace it before summer.

I don't think I could help you on this one, but by chance do you have any photos of this. It might be easyr for some one to help on this one.

Dave,
there is a thread about this subject... may help you out.

http://www.offshoreonly.com/forums/g...re-sensor.html

Sounds like the Livorsi ones, they are no longer made. I have the same ones and I have been working on finding parts for them since last fall. I have them apart and ready for new insides, hopefully I will know this week if I can get my hands on the internals.

Thanks all, this should give me some direction. I can post some pics Wed. as I will have the boat out to have some other work done.

Waconda,
I found a place that can supply a possible sensor. Just need the resistance value at 77* F..

Dick

Dick it is 1000 ohms, the one that I have that works anyway but when you hook it to the gauge it drops. I will send you a pic.

Dick I lost your email can you sent it to me.

Waconda, did you ever find parts? Now that I have been able to run this boat a little, I am finding out that nether of my drive sensors are working at all, and have only been able to find the whole kits. It would be nice if you could just replace the sensors, and I can have a new braided line made locally. If anybody can let me know how to get replacement parts it would be of great help