Bravo 3 problem
#11
JIM H
Charter Member
Thread Starter
Join Date: Oct 2000
Location: Amityville,N.Y.
Posts: 381
Likes: 0
Received 0 Likes
on
0 Posts
I think i found it. The shift cable to the drive was rubbing on the coupler.Worn threw to the cable itself. I got a new cable and will install it tomarrow.
#13
JIM H
Charter Member
Thread Starter
Join Date: Oct 2000
Location: Amityville,N.Y.
Posts: 381
Likes: 0
Received 0 Likes
on
0 Posts
What a ***** trying to route the cable housing. I got it under the starboard mount and up behind the power steering cyl . the problem is i couldnt get the cable to go threw. There was a too sharp of a turn when it went threw the transom assy. I'm going to retry it later