Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Drives and Lower Units (https://www.offshoreonly.com/forums/drives-lower-units-217/)
-   -   side by side #6 drive height??? (https://www.offshoreonly.com/forums/drives-lower-units/239172-side-side-6-drive-height.html)

OldSchool 10-14-2010 12:24 PM

1 Attachment(s)
I can use a straight edge and get an exact measurement for you this weekend, but I think that mine are within a half inch of being even with the running surface at neutral trim. 1988 Cig Top Gun with a notched transom. No issues whatsoever getting on plane :)

Craig

302Sport 10-14-2010 03:21 PM

but your sixes with a notched transom are way further back from the running surface than my 4's on boxes without a notch :drink:

OldSchool 10-14-2010 06:48 PM


Originally Posted by 302Sport (Post 3230511)
but your sixes with a notched transom are way further back from the running surface than my 4's on boxes without a notch :drink:

Chit, my bad. I thought that you said notched. Sorry about that.:drink:

CignificantOther 10-16-2010 11:14 AM

Craig:
Where are your drives at? I'm curious as I raised mine a few years ago to nearly even, but may lower back down one inch for more bow lift at cruising speed. Also, are those water pickups under the hull?
Steve

OldSchool 10-22-2010 01:43 PM


Originally Posted by CignificantOther (Post 3231919)
Craig:
Where are your drives at? I'm curious as I raised mine a few years ago to nearly even, but may lower back down one inch for more bow lift at cruising speed. Also, are those water pickups under the hull?
Steve

Finally got down to the boat with a straightedge the other night. My drives are 1" above the hull.

Those are water pickups under the hull.

CignificantOther 10-22-2010 02:28 PM

That is an aggressive "x" for a flat bottom Cigarette. These are just pleasure boats........right? :drink:


All times are GMT -5. The time now is 02:27 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.