JR marine..gimbal removal..
03-20-2011 | 08:24 AM
#11
Registered
Joined: Oct 2005
Posts: 209
Likes: 0
From: Sacandaga Lake
I used the jrmarine kit before and it worked great. he'll sell you 2 5/8 open ended wrenches that are notched out that im glad i bought them, they were pretty cheap and definately made the job easier. Great guy too I had never done that kind of job before and Ron gave me his cell # to call him over the weekend if I got stuck. Took about 6-7 hours first time but could do it again in probably 3.
08-07-2011 | 04:40 AM
#12
Registered
Joined: Jun 2009
Posts: 3
Likes: 0
Hi,
Also leaking water into my boat from the upper swifel / steering lever due to a bad seal.
I need to do the same *job* on my 1992 Alpha One Gen. 2 and would be glad having some tools/advice that will make that easier.
http://www.abload.de/image.php?img=07.08l73b.jpg
Is JR Marine out of business as their website is down ?
take care, Tom
Also leaking water into my boat from the upper swifel / steering lever due to a bad seal.
I need to do the same *job* on my 1992 Alpha One Gen. 2 and would be glad having some tools/advice that will make that easier.
http://www.abload.de/image.php?img=07.08l73b.jpg
Is JR Marine out of business as their website is down ?
take care, Tom
I used the jrmarine kit before and it worked great. he'll sell you 2 5/8 open ended wrenches that are notched out that im glad i bought them, they were pretty cheap and definately made the job easier. Great guy too I had never done that kind of job before and Ron gave me his cell # to call him over the weekend if I got stuck. Took about 6-7 hours first time but could do it again in probably 3.
Last edited by tom03; 08-07-2011 at 04:46 AM.
