Prop depth difference between Bravo 1 and Bravo 2?
10-13-2014 | 11:32 AM
#1
Thread Starter
Registered
Joined: Nov 2003
Posts: 2,296
Likes: 3
From: Lake Travis ,Texas
Prop depth difference between Bravo 1 and Bravo 2?
How much deeper does the prop sit on the Bravo 2 drive compared to the Barvo 1.?
Looked high and low online and cant find the size dimensions for both.
Looked high and low online and cant find the size dimensions for both.
10-13-2014 | 08:21 PM
#5
Banned
Joined: Jul 2011
Posts: 9,594
Likes: 46
From: Ft. Worth TX
bravo II can swing a 20 diameter prop bravo one can not. The lower is longer depth but the upper is basically the same. Bearing carrier for a Bravo II takes a different tool to take out compared to the bravo I.
Last edited by BUP; 10-13-2014 at 08:30 PM.
10-13-2014 | 08:29 PM
#6
Banned
Joined: Jul 2011
Posts: 9,594
Likes: 46
From: Ft. Worth TX
forgot the Bravo II uses a 19 spline prop shaft and Bravo I uses a 15 spline propshaft.
if I recall correctly its exactly right at 4 inches longer bravo II compared to Bravo I.
Also Bravo II were and still used on a lot of gas apps.
if I recall correctly its exactly right at 4 inches longer bravo II compared to Bravo I.
Also Bravo II were and still used on a lot of gas apps.
Last edited by BUP; 10-13-2014 at 08:51 PM.
