27' Eliminator Daytona Maiden Voyage
 

Here are some pics and a video of my 27' Eliminator Daytona, built by Boostpower USA. This past saturday we took it out to Lake Piru for it's first run and some final tuning. My dad also came along with his 21' Schiada River Tunnel. Sorry, the video is not the best quality. Enjoy.

http://www.3dementia.com/Eliminator/032908/DSC_0363.jpg

http://www.3dementia.com/Eliminator/032908/DSC_0367.jpg

http://www.3dementia.com/Eliminator/032908/DSC_0368.jpg

http://www.3dementia.com/Eliminator/032908/DSC_0369.jpg

http://www.3dementia.com/Eliminator/032908/DSC_0357.jpg

http://www.youtube.com/watch?v=a8MN0S-c3J8

nice did you get hassled by the sherrifs because of the speed limit? bring it out to castaic sunday..

Hey ARA what drive , prop and drive height?

Na, they didn't bother us. We got there pretty early and left by about 1:00pm. Plus since we were tuning, we weren't going that fast. Also, the lake was full of logs and other floating debris. I'll be in Havasu this weekend, so I can't make it to Castaic.

I'm not sure about the drive height or gear ratio, but we started out with a labbed Bravo 28p.

ARA have a look at where the prop shaft is in relation to the bottom of the 2 hulls with the drive level.
Do you know what RPM's you should be turning that motor?

Looks and SOUNDS great...!!! :p

Welcome to the walkthru bowrider world. From the little video I saw I am going to say your X is too low. I was thinking from a earllier post that motor was around 1000HP. If so and you are running 1.36 gears the 28" labbed should be too small.

The walkthru daytona does not react like other daytonas do without all of the extra weight this boat has. Trust me, been there and done that.

Yeah me too.The 28 should be on the limiter at about 1/3 throttle with the correct height.Hey Turbo tell me about yours.

2002 26 Daytona with walk thru bowrider, Bravo XY on standoff box, chev 540, CMI E tops, procharger M4, 10lbs of boost, Fast EFI, Hydromotive 5PX 29 or 30 lab bravo, & Rtech intercooler.

Hard to compare my X with yours because of your standoff.What HP,ratio and speeds?