33 Daytona Build - The Red Rocket !!
01-09-2015 | 08:58 PM
#21
Thread Starter
Registered User
Joined: Jul 2007
Posts: 859
Likes: 0
From: Alta Loma, CA
[ATTACH=CONFIG]535471[/ATTACH]
It's prolly gonna be another two weeks (or more) before we move it out to rigging...after the above is completed, it gets a complete once over the gel, complete color sand & polish, etc.
If we're going to flo-coat the engine bay, that's another week or two. If it's getting a front/rear cap, and two MORE weeks...
LOTS & LOTS OF HOURS in hand labor putting these boats together...
It's prolly gonna be another two weeks (or more) before we move it out to rigging...after the above is completed, it gets a complete once over the gel, complete color sand & polish, etc.
If we're going to flo-coat the engine bay, that's another week or two. If it's getting a front/rear cap, and two MORE weeks...
LOTS & LOTS OF HOURS in hand labor putting these boats together...
Last edited by shueman; 01-09-2015 at 09:16 PM.
01-10-2015 | 12:11 AM
#22
Registered
Joined: Oct 2003
Posts: 309
Likes: 5
01-23-2015 | 06:34 AM
#26
Thread Starter
Registered User
Joined: Jul 2007
Posts: 859
Likes: 0
From: Alta Loma, CA
The boat is in final polishing...hours and hours of hand sanding to get it ready.
Motors and Drives arrived last Friday...pulled from the donor boat this week and on display.
I'll get "fresh" pix this morning and post 'em up...
Last edited by shueman; 01-23-2015 at 06:45 AM.
