Sources for new starters?????
07-30-2007 | 05:32 PM
#2
Registered
Joined: Jan 2004
Posts: 5,325
Likes: 112
From: Northern NY
If my aging mind serves me correctly, I have two on the marine parts shelf in my warehouse. They were off my Velocity with the 454 Mags, couldn't use them on the 525 SC's because of the bump out Canton oil pans and had to buy the mini starters. I'll check in the AM, but I know they are still there. The Mags were 1996 models, should be the same, I'll check for numbers. Get me your cell #, I'll call you.
07-30-2007 | 07:11 PM
#3
Forum Regulator
Joined: May 2001
Posts: 24,210
Likes: 1,604
From: Worldwide
07-30-2007 | 08:54 PM
#6
Thread Starter
Registered
Joined: Aug 2002
Posts: 2,896
Likes: 3
From: Eastern Lake Ontario
07-30-2007 | 08:56 PM
#7
Thread Starter
Registered
Joined: Aug 2002
Posts: 2,896
Likes: 3
From: Eastern Lake Ontario
If my aging mind serves me correctly, I have two on the marine parts shelf in my warehouse. They were off my Velocity with the 454 Mags, couldn't use them on the 525 SC's because of the bump out Canton oil pans and had to buy the mini starters. I'll check in the AM, but I know they are still there. The Mags were 1996 models, should be the same, I'll check for numbers. Get me your cell #, I'll call you.
315-349-7572
07-31-2007 | 10:45 AM
#9
Thread Starter
Registered
Joined: Aug 2002
Posts: 2,896
Likes: 3
From: Eastern Lake Ontario
New starter is on its way. Brand new, original part number, from NAPA (believe it or not), $198.00. Of course, I need new exhaust gaskets too, had to rip the exhaust off for access. Not too bad a job though. Should be on the water again be Saturday.
Thanks for the help guys, I'm all set.
Thanks for the help guys, I'm all set.
