there is a set of 4 rectangle port heads new to the swap shop

I PM'd him thanks for the heads up!

I have three rect. heads. Currently located near Cleve. Ohio. They have been magnafluxed.

PM me with details please!!

I may have 4 rec port heads off a 420 hp complete with crane gold rockers will need valve job but no cracks. I will know on monday. I live 5 min from Pt. Huron MI. in Sarnia Ontario. Andy

PM me and let me know Thanks!!

**UPDATE**

Pulled the pan on the motor i thought was sick and sure enough. The banging around was the rod. Number 8 cylinder the piston broke at the wristpin. The rod is still connected to the crank and was banging in the cylinder. I think the block is also cracked. I drained a gallon of water out of the pan before oil came out Any way i am glad i found it was the motor and not the trans or drive.

Hey Jeremy
I saw someone has some heads in swap ( new add)

Ramb

Jeremy,

You may have already saw this in the classifieds,

http://www.offshoreonlyclassifieds.c...o19764-en.html

I have delt with Lenny before and had good experiences.

Lenny is a very good friend of my frind Chuck (scarabchuck)
built him a killer 540 that makes his scarab go 82mph
adn does all the machine work for Chuck and other Detroit area go fast guys

Ramb