Silent Thunder help
11-11-2007 | 08:07 AM
#13
Registered
Joined: Feb 2004
Posts: 4,909
Likes: 9
From: Northeast,Fla
I see what you talking about now .... My box is not back on yet ....The mount on the Transom for the Rams is just below the Gasket for the ST and I'm thinking we took some measurements and it was close but would be ok ...cept that just clearance for the mounts ...your saying as the rams come up to trim the will hit the box below the exhaust outlets ?
11-11-2007 | 06:43 PM
#14
Thread Starter
Toxic FORMULA
Joined: May 2002
Posts: 4,238
Likes: 1
From: pitman nj
Well , I'm going to lose from the crease(and pipes) down
Mine would be SO close I wouldn't be able to tilt the drives above the lowest part of the boat and that is in the straight position. Have the wheel turned and it only gets worse. So if I got into a shallow situation I could be screwed.
Mine would be SO close I wouldn't be able to tilt the drives above the lowest part of the boat and that is in the straight position. Have the wheel turned and it only gets worse. So if I got into a shallow situation I could be screwed.
Last edited by mopower; 11-11-2007 at 06:46 PM.
