Project......382
#132
Diamond Member #001
Charter Member
Thread Starter
iTrader: (2)
Join Date: Oct 2000
Location: Coastal North Carolina
Posts: 4,808
Likes: 0
Received 5 Likes
on
4 Posts
Big day, thanks to my wife, RAddiction and Sox! We finished installing the bilge blowers, platform, generator and.....
__________________
Retired! Boating full-time now.
Retired! Boating full-time now.
#133
Diamond Member #001
Charter Member
Thread Starter
iTrader: (2)
Join Date: Oct 2000
Location: Coastal North Carolina
Posts: 4,808
Likes: 0
Received 5 Likes
on
4 Posts
THE PORT ENGINE!!!
Since we were limited on how high we could lift the engine by the ceiling of the shop, we had to set it down on wood legs, extend the lifting straps, and finish dropping it in. Tricky (and a bit hair-raising for RAddiction, who was in the bilge). but it worked....
Since we were limited on how high we could lift the engine by the ceiling of the shop, we had to set it down on wood legs, extend the lifting straps, and finish dropping it in. Tricky (and a bit hair-raising for RAddiction, who was in the bilge). but it worked....
__________________
Retired! Boating full-time now.
Retired! Boating full-time now.
#134
Diamond Member #001
Charter Member
Thread Starter
iTrader: (2)
Join Date: Oct 2000
Location: Coastal North Carolina
Posts: 4,808
Likes: 0
Received 5 Likes
on
4 Posts
Engine(s) by mood light. These are the lower lights that were installed last week. It is actually brighter that it appears here (bright enough to work), but a very cool effect.
Taking the day to re-organize the shop tomorrow, but hopefully we'll get to THE STARBOARD ENGINE ON Sunday.
Phew.....
Taking the day to re-organize the shop tomorrow, but hopefully we'll get to THE STARBOARD ENGINE ON Sunday.
Phew.....
__________________
Retired! Boating full-time now.
Retired! Boating full-time now.
#136
AT Cult Member #3
VIP Member
Chuck, do the cables todayAll in all things went well.....a few years off my life while in the bilge but Dianne got me a drink when the motor mount bolts were tight. This project is off the hook, the rigging is awesome, the motors....I mean engines are works of art with the serp belt system chuck made and the plethora of powdercoated parts, diamond plate and polished parts.
#138
Diamond Member #001
Charter Member
Thread Starter
iTrader: (2)
Join Date: Oct 2000
Location: Coastal North Carolina
Posts: 4,808
Likes: 0
Received 5 Likes
on
4 Posts
John & Rob - Thanks a million for all the help. Glad to see the boys back home where they belong....
__________________
Retired! Boating full-time now.
Retired! Boating full-time now.