TIBBC "The Thread" again...
#2301
Registered

Joined: Jan 2004
Posts: 5,325
Likes: 112
From: Northern NY
This hull comes out differently anyways, they actually install a vent into the notch to break it loose, like the vent hose on a six drive, so it needs to spin a little. The trick is the props need to be able break loose a little but keep moving the boat forward. It's a real fine line between a little and so much it looses it's bite altogether. Nature of the beast, I'll get it there.
Meantime, if Bob wants to drag race I say we do a full mile. That should give me a 1/4 to get it out, a 1/4 to run him down, and a 1/2 to put a 1/4 between us.
#2302
I think the boat comes on plane real well...Pete just needs to learn patience. Let it get moving a little before you hammer it. Two things will happen...No more fuzz on the magnet, and it will fall over eaiser. You know, like the first time you put it up on plane. Also, don't put the tabs down so far.
I thought he'd learn that those HIGH X's require some finesse.
Hey Ragged...Ease off on Rippem. Remember who helped you in the pouring rain...
Dave
I thought he'd learn that those HIGH X's require some finesse.
Hey Ragged...Ease off on Rippem. Remember who helped you in the pouring rain...
Dave
, last Sunday was the nicest day on Ontario so far and there was still a couple feet of slop out there.
#2303
Registered

Joined: Jan 2004
Posts: 5,325
Likes: 112
From: Northern NY
#2305
This hull comes out differently anyways, they actually install a vent into the notch to break it loose, like the vent hose on a six drive, so it needs to spin a little. The trick is the props need to be able break loose a little but keep moving the boat forward. It's a real fine line between a little and so much it looses it's bite altogether. Nature of the beast, I'll get it there.
Meantime, if Bob wants to drag race I say we do a full mile. That should give me a 1/4 to get it out, a 1/4 to run him down, and a 1/2 to put a 1/4 between us.
Meantime, if Bob wants to drag race I say we do a full mile. That should give me a 1/4 to get it out, a 1/4 to run him down, and a 1/2 to put a 1/4 between us.

#2307
Registered

Joined: Jan 2004
Posts: 5,325
Likes: 112
From: Northern NY
Never heard of a two way, a three way maybe, but never a two way. You research that and get back to me.
#2308
Registered
Joined: Sep 2007
Posts: 727
Likes: 0
From: Rochester,NY
Jeff
#2309
Registered
Joined: Sep 2007
Posts: 727
Likes: 0
From: Rochester,NY
We were in Sodus Bay, Port Bay and Fair Haven sunday afternoon with my boys from Rochester... the 3 311s.
The lake was awesome.
Jeff


