Go Back  Offshoreonly.com > Owners Forum > Formula
re-setting the windsheild >

re-setting the windsheild

Notices
Formula

re-setting the windsheild

Old 05-26-2010 | 11:17 AM
  #11  
Registered
 
Joined: Oct 2009
Posts: 136
Likes: 0
From: Dayton, Ohio
Default

Originally Posted by offthefront
Are the screws under the Rubber Gasket? So you pull the Gasket , remove the screws and then you could remove the entire Assembly? Is it leaking between the frame and the weather stripping?

What I would like to have is a new rubber Gasket ..... I cant believe its not available or at least there isn't someone that could make some up ....Maybe if we bought 10 sets ? ........m
are you talking about the filler strip? or the actual gasket between the frame and hull??
theadamv1 is offline  
Reply
Old 05-26-2010 | 12:36 PM
  #12  
offthefront's Avatar
Registered
20 Year Member
 
Joined: Feb 2004
Posts: 4,909
Likes: 9
From: Northeast,Fla
Default

Originally Posted by theadamv1
are you talking about the filler strip? or the actual gasket between the frame and hull??
Filler Strip ...
offthefront is offline  
Reply
Old 05-27-2010 | 07:26 AM
  #13  
Registered
 
Joined: Oct 2009
Posts: 136
Likes: 0
From: Dayton, Ohio
Default

Originally Posted by offthefront
Filler Strip ...

My 88 actually has molded plastic filler strip that snaps in the channel where the screws secure the w/sheild frame to the hull to conceal the screws..
theadamv1 is offline  
Reply
Old 05-27-2010 | 10:21 AM
  #14  
Audiofn's Avatar
Thread Starter
Charter Member #232
20 Year Member
Charter Member
Super Moderators
 
Joined: Oct 2000
Posts: 18,417
Likes: 6
From: Carlisle, MA USA
Default

I think that there are some bolt that you access through the side panels and then in the front of the windsheild you have screws under the rubber. Mine is like "theadamv1" with just a almost flat plastic filler. I would like to get new one however as mine has also shrank a bit.
__________________
Put your best foot forward!
Audiofn is offline  
Reply
Old 05-27-2010 | 07:01 PM
  #15  
Registered
 
Joined: Feb 2010
Posts: 22
Likes: 1
From: Kansas City
Default

Where the Curved windshields meets on my 89242LS has this shrinkage.... Can we fix it or have to replace it??
pdm007 is offline  
Reply
Old 05-27-2010 | 08:24 PM
  #16  
Registered
 
Joined: Sep 2007
Posts: 727
Likes: 0
From: Rochester,NY
Default

Originally Posted by offthefront
Are the screws under the Rubber Gasket? So you pull the Gasket , remove the screws and then you could remove the entire Assembly? Is it leaking between the frame and the weather stripping?

What I would like to have is a new rubber Gasket ..... I cant believe its not available or at least there isn't someone that could make some up ....Maybe if we bought 10 sets ? ........m
Count me in .... I need to the same thing .....

I had 5 guys lift it off and "seal it" .... worked until I used my boat with the bimini top up.

Ever since then it has leaked again .... what a pain in the azz!

Jeff
got twins ? is offline  
Reply
Old 05-28-2010 | 09:27 AM
  #17  
Registered
 
Joined: May 2008
Posts: 266
Likes: 0
Default

I would be in for a gasket as well. I have one side that has the flat plastic part and the other has nothing.
jmrapp is offline  
Reply
Old 05-28-2010 | 06:26 PM
  #18  
offthefront's Avatar
Registered
20 Year Member
 
Joined: Feb 2004
Posts: 4,909
Likes: 9
From: Northeast,Fla
Default

I'll do some checking next week .....m
offthefront is offline  
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.