400SS ILMOR 725 numbers
#21
The 565's that were in the 400SS demo boat in Miami have been removed and sent back to Mercury, but they may have been pre-production prototypes. Don't know about the TDI engines, but that is great technology. I would be concerned about putting any big diesel torque numbers through Bravo drives; Volvo's DP-H is much, much beefier.
__________________
Retired! Boating full-time now.
Retired! Boating full-time now.
#22
Thread Starter
Registered
Joined: Jan 2012
Posts: 42
Likes: 0
From: Saint Charles, IL
#23
Registered
Joined: Mar 2007
Posts: 276
Likes: 0
From: Gelsenkirchen, Germany
If you look for a lightweight Diesel package for the 400 SS you should consider the Yanmar 370 V 8 Diesels
You will save about 1000 lbs compared to the Volvo D 6
and the drives have a hydraulis clutch
which works way better than a cone clutch with the Joystick System
Another great Diesel package would be the lightweight 500 HP
Marinediesel , based on the GM 6,6 Duramax
http://www.performancediesel.com/pro...diesel/vgt500/
http://www.performancediesel.com/wp-...GT500-MACC.pdf
http://www.marinedieselengineering.c...gines/vgt-500/
You will save about 1000 lbs compared to the Volvo D 6
and the drives have a hydraulis clutch
which works way better than a cone clutch with the Joystick System
Another great Diesel package would be the lightweight 500 HP
Marinediesel , based on the GM 6,6 Duramax
http://www.performancediesel.com/pro...diesel/vgt500/
http://www.performancediesel.com/wp-...GT500-MACC.pdf
http://www.marinedieselengineering.c...gines/vgt-500/



