Fountain trim
02-09-2006 | 06:33 PM
#11
Registered
Joined: Aug 2005
Posts: 1,845
Likes: 3
From: New Jersey
Re: Fountain trim
Originally Posted by US1 Fountain
You can change over your single in-throttle switch to a dual switch setup, 1 for drives, 1 for tabs. I'm doing this right now.
What brand levers do you have now?
What brand levers do you have now?
Nordic95
02-09-2006 | 08:48 PM
#14
Ginger or Mary Ann?
Joined: Oct 2000
Posts: 11,030
Likes: 9
From: L
Re: Fountain trim
I added the single to the black ones, Kieksauffers, on my '94. However, it required some customizing since the levers didn't have the wire feed tube. I added that myself. Easiest too just buy the clamp ons that face the front.
The Gaffrig..... I ordered the dual switch from LIvorsi, to replace my single, (dual switch plate w/ switches, wires, diodes) for a shade over $100. Only using 1 of the $0.91 switches and the $4 diodes. Not a good business decision...pay over $100 for a part, and only use $5 worth of it.
The Gaffrig..... I ordered the dual switch from LIvorsi, to replace my single, (dual switch plate w/ switches, wires, diodes) for a shade over $100. Only using 1 of the $0.91 switches and the $4 diodes. Not a good business decision...pay over $100 for a part, and only use $5 worth of it.
Last edited by US1 Fountain; 12-02-2011 at 11:15 AM.
