Looking at a 94 Fever with 415s.
Anything special to check out before a survey.
How does the non step compare to the early 95 and 96 step hulls?
What kind of speeds with stock 415s

Thanks

The Merc 502 Mag 415hp were notorious for water reversion. I would have the risers removed and look for traces of water. Better yet remove a exhaust manifold and look up the exhaust port and see if the valve stems are coroded. As far as the boat goes as always have a full survey done and check for rotted wood on the transon and stringers. If the engines and props are healthy you might see low 70's