What spark plugs are we runnin' in our 502's?
05-04-2008 | 10:53 PM
#4
Thread Starter
Registered
Joined: Jan 2008
Posts: 2,357
Likes: 2
From: San Diego
I put those in it because they are what was billed on the work order I recived with the boat when I got my boat from the previous owner.
Some one had put 8's in it .They forgot to take a few sealing rigs off when they removed the old plugs. (they are kinda smashed it there) . so it had 2 sealing rings on all port side plugs.
Since then I ran it hard on the water and she reealy runs great..Better that before.. The blower screams in my ear like the sound I have alaways needed in my life..Thanks for the info .Were runnin' the 9's from here on out..Chad
Some one had put 8's in it .They forgot to take a few sealing rigs off when they removed the old plugs. (they are kinda smashed it there) . so it had 2 sealing rings on all port side plugs.
Since then I ran it hard on the water and she reealy runs great..Better that before.. The blower screams in my ear like the sound I have alaways needed in my life..Thanks for the info .Were runnin' the 9's from here on out..Chad
05-05-2008 | 04:47 AM
#5
Platinum Member
Joined: Dec 2003
Posts: 1,657
Likes: 5
From: Epping N.H.
From the look of your pic in your avitar looks like you have a single Dominator carb I had twin 600 Hollys I was told by the Builder They work out the same after the 600s were jetted only difference was more air flow at boost. Those plugs should serve you well would change mine very season..
Bob
Bob
