Offshoreonly.com
Page 3 of 19
1
2
3
4
5
13
Last »
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Fountain (https://www.offshoreonly.com/forums/fountain-37/)
-   -   SCX 4's on a 35 (https://www.offshoreonly.com/forums/fountain/271366-scx-4s-35-a.html)

Reggie Fountain 02-29-2012 08:19 AM
The scx -4 drives you can't use the water pickups in the drives. There only for cooling of the drives. You have to run external pickups.

KWright 02-29-2012 08:59 AM
Originally Posted by Reggie Fountain (Post 3629781)
The scx -4 drives you can't use the water pickups in the drives. There only for cooling of the drives. You have to run external pickups.
That's what I thought too. The one at the show had the water neck on the inside of the transom, I asked Imco about it and they said it was for engine cooling. I will double check today when they open.

mcprodesign 02-29-2012 10:51 AM
Originally Posted by KWright (Post 3629749)
ya that thing has been thru hell and back. they are 15x29,
Not sure if we can post price in this forum so I will pm you, I bought these new last June.
No worries. 34 is what I was thinking they might be

575cat 02-29-2012 12:33 PM
Hey chad, get those lowers on yet and try it ?

mcprodesign 02-29-2012 04:36 PM
Originally Posted by 575cat (Post 3629968)
Hey chad, get those lowers on yet and try it ?
I had to rebuild a upper..So my drive guy put that upper lower together/ done. Just have to switch the other lower. Splash plates should be here tomorow. Working 7 day's a week for 2 more weeks then I will test it. I think 2-4 mph to start w the same props. But I want to spin 34's eventually

Sorry to jack up the tread :D

KWright 03-27-2012 04:21 PM
Imco helmets installedAttachment 471608

KWright 03-27-2012 04:25 PM
3 Attachment(s)
Dave at Imco got my lower cases back from Wilson Custom Marine. E-mailed me these pics
Attachment 471609

Attachment 471610

Attachment 471611

1 MAIDEN AMERICA 03-27-2012 04:42 PM
Look sweet. After you put a few runs on them let me know if you see small pits in the skeg. I have some appearing. Porosity? Cavitation?
Thanks

1 MAIDEN AMERICA 03-27-2012 04:45 PM
BTW IMCO told me to cap the water outlet on the inner transom plate and toss the outer hose.

KWright 03-28-2012 01:32 PM
Originally Posted by 1 MAIDEN AMERICA (Post 3650398)
Look sweet. After you put a few runs on them let me know if you see small pits in the skeg. I have some appearing. Porosity? Cavitation?
Thanks
Will do. It will be a little while yet.


All times are GMT -5. The time now is 03:48 PM.
Page 3 of 19
1
2
3
4
5
13
Last »
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.