|
SCX 4's on a 35
Just ordered my imco scx4's from John Teague. thier going to send bottom's out next week to Craig Wilson for blueprinting. This will put my propshaft c/l about 1" above the bottom. Herring 5 blades. Be interesting to see what this does.
|
Originally Posted by KWright
(Post 3626333)
Just ordered my imco scx4's from John Teague. thier going to send bottom's out next week to Craig Wilson for blueprinting. This will put my propshaft c/l about 1" above the bottom. Herring 5 blades. Be interesting to see what this does.
|
It's a 2001 race hull. The motors are N/A 550 hp. With reg XR's and hydro p5x's it would run right at 90 @ 5500 rpm.
|
Are you going to run SSM style props on them or Bravo style?
|
SSM Herring wants to start out with a 17x30. Would like to turn the motors 6200 rpm.
|
Originally Posted by KWright
(Post 3626374)
SSM Herring wants to start out with a 17x30. Would like to turn the motors 6200 rpm.
|
Should run great, sounds like a fun project.
|
Sounds like a cool deal, keep us updated !
|
Originally Posted by A.O. Razor
(Post 3626418)
Ok. Looks like you're shooting for 100+ mph with those Herings? Any motor upgrades?
|
Originally Posted by Reggie Fountain
(Post 3626429)
Should run great, sounds like a fun project.
|
| All times are GMT -5. The time now is 04:44 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.