speedfreek1

anyone know what size the opening is or could you could you mesure yours and post I need to buy one for this weekend but my boat is at the lake an hour away .. thanks in advance..

hieght
width
depth

flying J

I have a brand new one never used out of my 2004 Fever. I took it out when the boat was new and put it in the garage. You can have it for 50 bucks I'll be at the LOTO all summer or I can ship it. Call me in the evening if interested

405-388-6998
Jeremy

Mark D

Let's talk Porta-Potties....

Mine is in the garage so I measured:
12" Tall
13" Wide
15" Deep

It's a Porta-Potti 100 series, model 135 and I hope to never have to use it....

Wes Burmark

Mine is in the garage and I can measure it in the morning and let you know. It is connected to a pump out located on the starboard side of the boat.

US1 Fountain

iTrader: (1)

Same one my 32 had in it. Also removed it and stored in basement.
THese are the small units. I 'think' that for most part there are only 2 sizes??? Anything taller won't fit under cushion.

Wes Burmark

As mentioned before, mine has a pump-out feature located on the back (pointing towards the front of the boat) on the starboard side. The measurements are 12" tall, 14.5" deep, and 12.5 inches wide. I had to space my PP up 1/2" so the lever would clear the bottom lip of the hinged and carpeted panel. My last boat had a PP w/o the pump-out feature. I guess it would depend on how close you are to the nearest pump facility but as little as these models hold my current thinking is I would rather have a PP that could be removed and emptied rather than having to find a pump-out station. My closest station is over 7 miles away. As others have mentioned you cannot go larger, especially taller, (there is a little bit of wriggle room for depth and width) as it will not fit under the cushion. Good luck. Remember to pick up deodorant and RV toilet tissue!

speedfreek1

thanks guys just got back on here. I got real busy ...