Offshoreonly.com - Water Pressure Gauge

Page 3 of 3

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Fountain (https://www.offshoreonly.com/forums/fountain-37/)

- - Water Pressure Gauge (https://www.offshoreonly.com/forums/fountain/313677-water-pressure-gauge.html)

SB	07-21-2014 06:36 PM

Is 'thermal state' Floridian lingo for 'Thermostat?'

RaggedEdge

10-27-2014 07:07 AM

Quote:

Originally Posted by Kelly O (Post 4136608)

Pretty sure that's a mechanical gauge, does it have a rubber line running to it ?

Probably froze due to not being drained when winterizing. If it sweeps the same as the other gauge, your pressures are probably the same for each motor. Replacing the gauge would fix it.

So where does it attach to the engine? Have never done these but figured I should this year.

Cole2534

10-27-2014 11:11 AM

Port side block drain is where mine is connected. Beside draining the gauge of water, it's also nice to blow out all the sediment that gets in the hose.

RaggedEdge

10-27-2014 11:56 AM

Thanks but have 525 EFI's, closed cooling here.

Anyone have the answer?

All times are GMT -5. The time now is 09:06 PM.

Page 3 of 3

Show 40 post(s) from this thread on one page