Go Back  Offshoreonly.com > Owners Forum > Fountain
NON step 35 Top Speeds >

NON step 35 Top Speeds

Notices

NON step 35 Top Speeds

Thread Tools
 
Old 03-14-2017 | 03:40 PM
  #41  
Registered
15 Year Member
 
Joined: Feb 2008
Posts: 6,759
Likes: 157
From: Connecticut
Default

Originally Posted by 253
approx. 8,000# dry, then add 160 gal. gas, 2 riders, 2 anchors, toolbox, 2 coolers, 50# of misc. stuff you never use and old flat bottom 35's get heavy, but still run very well.
Do you 35 flat bottom guys run Bravo1 props or Hydromotive?
kreed is offline  
Reply
Old 03-14-2017 | 04:31 PM
  #42  
Registered
 
Joined: Jul 2009
Posts: 8,527
Likes: 706
From: Taunton Ma
Default

5.6% slip with 1.36 gears and 6000 rpm.... Good luck
Unlimited jd is offline  
Reply
Old 03-14-2017 | 05:09 PM
  #43  
Registered
 
Joined: Mar 2012
Posts: 4,189
Likes: 55
From: Cape coral, FL
Default

Originally Posted by Wildman_grafix
ICU on here ran his 95 step hull across the scales and I think it came in around 8600-8800. That was with bravos.


Remember these 33-35 fountains are fly weight 30 foot boats.
Phil it was 9500ish for the boat.
Crude Intentions is offline  
Reply
Old 03-14-2017 | 06:38 PM
  #44  
VIP Member
20 Year Member
VIP Member
 
Joined: Jan 2005
Posts: 368
Likes: 2
From: Cincinnati ,Ohio
Default

Originally Posted by kreed
Do you 35 flat bottom guys run Bravo1 props or Hydromotive?
I have a set of both the hydros are a couple miles per hour faster and are fun to drive use mostly for poker runs and the bravos give me a better cruise speed at a lower rpm mine turn out.
tman is offline  
Reply
Old 03-14-2017 | 06:56 PM
  #45  
Platinum Member
20 Year Member
Platinum Member
 
Joined: Apr 2005
Posts: 1,350
Likes: 214
From: St.Peters,Mo/5mm LOTO/LEOPA
Default

when we raced the konrad fountain of youth it was 9260 lbs hanging on the crane with nothing in it and 30 gallons of fuel in each tank ready to race. that was a 86 10 meter. that boat and my 92 35 prefer hydromotives.
flat rate is offline  
Reply
Old 03-14-2017 | 08:52 PM
  #46  
Registered
 
Joined: Sep 2012
Posts: 616
Likes: 0
From: New Bern, NC
Default

Originally Posted by 1428turbo
110mph.....35 lightning...blown 540s.....1000hp each.....upriver.....hydromotive 28s.
Must have been on the Pamlico
Brandonb_05 is offline  
Reply
Old 03-14-2017 | 09:50 PM
  #47  
Registered
 
Joined: Feb 2017
Posts: 75
Likes: 0
Default

i cannot wait to see what mine will run once motors are done....im hoping 80mph
93fountainsig35 is offline  
Reply
Old 03-15-2017 | 07:50 AM
  #48  
Registered
15 Year Member
 
Joined: Feb 2008
Posts: 6,759
Likes: 157
From: Connecticut
Default

Originally Posted by tman
I have a set of both the hydros are a couple miles per hour faster and are fun to drive use mostly for poker runs and the bravos give me a better cruise speed at a lower rpm mine turn out.
What HP are you running and what size Hydros?
kreed is offline  
Reply
Old 03-15-2017 | 07:52 AM
  #49  
Registered
15 Year Member
 
Joined: Feb 2008
Posts: 6,759
Likes: 157
From: Connecticut
Default

Originally Posted by 93fountainsig35
i cannot wait to see what mine will run once motors are done....im hoping 80mph
What are you putting in for engines?
kreed is offline  
Reply
Old 03-15-2017 | 08:39 AM
  #50  
Registered
 
Joined: Jul 2009
Posts: 8,527
Likes: 706
From: Taunton Ma
Default

509's Canfield heads, crane 168811 cams should be 620 or so
Unlimited jd is offline  
Reply


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.