Like Tree0Likes

1983 Formula 26 Sc Express

Reply
Old 07-02-2005, 07:28 PM
  #1
Registered
Thread Starter
 
Join Date: Jul 2005
Posts: 3
Question 1983 Formula 26 Sc Express

GREETINGS TO ALL ,, NEW TO THE SITE AND ENJOYING EVERYTHING SO FAR... I RECENTLY PURCHASED A 1983 FORMULA 26 SC EXPRESS .. IT HAS BEEN SITTING ON A TRAILER IN A BACKYARD FOR OVER 15 YEARS.. PRETTY MUCH EVERYTHING WILL NEED TO BE REDONE.. BOTH MOTORS AND OUT DRIVES ARE SHOT, AND WILL NEED TO BE REPLACED .... THE HULL IS IN GREAT SHAPE THOUGH ... I WAS CONSIDERING PUTTING A ENGINE BRACKET ON THE BACK OF THE TRANSOM AND HANGING A COUPLE OF 200 / 250 4 STROKE OUTBOARDS ...
HAS ANYONE EVER SEEN THIS DONE TO A FORMULA ?? I HAVE CONTACTED FORMULA ABOUT GETTING INFO ON DOING THIS ,,, NOT MUCH COULD BE FOUND THIS MODEL BECAUSE OF ITS AGE .... ANY INFO ON THIS SUBJECT WOULD BE HELPFUL.....I KNOW THERE A MANY THINGS TO CONSIDER ,,, DOES ANYONE KNOW IF THE TRANSOM ON THE FORMULA'S ARE SOLID CORE ? OR ARE THEY JUST BUILT THICKER WHERE THE OUT DRIVES COME THROUGH ?? THANKS ONCE AGAIN & GOOD LUCK BOATING TO ALL !!!!

Last edited by RJH10; 07-02-2005 at 07:39 PM.
RJH10 is offline  
Reply With Quote
Old 07-04-2005, 01:19 AM
  #2
Banned
 
cuda's Avatar
 
Join Date: Sep 2001
Location: Deland, Florida
Posts: 25,191
Default Re: 1983 Formula 26 Sc Express

The transoms are plywood cored.
cuda is offline  
Reply With Quote
Old 02-18-2012, 10:49 AM
  #3
Registered
 
Join Date: Feb 2012
Posts: 1
Default

Quote:
Originally Posted by RJH10 View Post
GREETINGS TO ALL ,, NEW TO THE SITE AND ENJOYING EVERYTHING SO FAR... I RECENTLY PURCHASED A 1983 FORMULA 26 SC EXPRESS .. IT HAS BEEN SITTING ON A TRAILER IN A BACKYARD FOR OVER 15 YEARS.. PRETTY MUCH EVERYTHING WILL NEED TO BE REDONE.. BOTH MOTORS AND OUT DRIVES ARE SHOT, AND WILL NEED TO BE REPLACED .... THE HULL IS IN GREAT SHAPE THOUGH ... I WAS CONSIDERING PUTTING A ENGINE BRACKET ON THE BACK OF THE TRANSOM AND HANGING A COUPLE OF 200 / 250 4 STROKE OUTBOARDS ...
HAS ANYONE EVER SEEN THIS DONE TO A FORMULA ?? I HAVE CONTACTED FORMULA ABOUT GETTING INFO ON DOING THIS ,,, NOT MUCH COULD BE FOUND THIS MODEL BECAUSE OF ITS AGE .... ANY INFO ON THIS SUBJECT WOULD BE HELPFUL.....I KNOW THERE A MANY THINGS TO CONSIDER ,,, DOES ANYONE KNOW IF THE TRANSOM ON THE FORMULA'S ARE SOLID CORE ? OR ARE THEY JUST BUILT THICKER WHERE THE OUT DRIVES COME THROUGH ?? THANKS ONCE AGAIN & GOOD LUCK BOATING TO ALL !!!!
Graetings form Argentine:

I have foun this: http://www.engravingsvc.com/formula/...20Brochure.pdf

I do not know if you can help.-

I have in argentine This: can you helpme with this model ?
I think it's a 26 sc

1) http://vehiculo.mercadolibre.com.ar/...casco-1996-_JM


2) http://vehiculo.mercadolibre.com.ar/...bird-26-80-_JM
pablogueller is offline  
Reply With Quote
Reply

Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
MILD THUNDER
Insurance and Finance
2
03-27-2008 08:55 AM
Phantom1
Classic Offshore
3
03-05-2007 07:27 AM
djtalon
Superboat
1
04-06-2005 11:14 AM
Jolley
General Boating Discussion
18
03-21-2002 01:33 PM



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -5. The time now is 09:57 PM.


Copyright 2011 OffShoreOnly. All rights reserved.