Drive stand project.
05-29-2006 | 02:57 AM
#31
Registered
Joined: Apr 2005
Posts: 2,675
Likes: 0
From: KENT ISLAND, MARYLAND
Re: Drive stand project.
Originally Posted by Bad Girl
Anyone need a custom stand to work on drives? this one I have lets you bolt the upper or lower to a plate and the handle has a 21:1 ratio gearbox to let you roll it 360 deg. and strong enough to work on drive. No clamping on the cav plate.Also an adapter for holding a BW trans to work on it. $200.
an sorry for any threadjacking here. thought of it while looking a yours. Ken
an sorry for any threadjacking here. thought of it while looking a yours. Ken
Rodger, your stands are awsome, I think you could put the whole boat on them and they wouldnt even feel it....great job
Last edited by GOODT; 05-29-2006 at 03:01 AM.
05-29-2006 | 09:13 AM
#32
VIP Member
Joined: Nov 2002
Posts: 376
Likes: 0
From: Great Lakes
Re: Drive stand project.
Joe , I'm not sure who made it but when I bought a set of trs tools this came with it. the mechanic said it was custom made for all drives and he even held trannies on it. I know he did not build it. It sure works well. I dont need it anymore and can't figure out another good use for it
ROGER , very nice. I would beg for a pair but would rather sell my drives that store them.
Ken
ROGER , very nice. I would beg for a pair but would rather sell my drives that store them.
Ken
__________________
47 Lightning SE
47 Lightning SE
05-29-2006 | 09:29 AM
#33
Registered
Joined: May 2005
Posts: 3,897
Likes: 1
From: LOTO Performance Boat Center
Re: Drive stand project.
Those stands look nice, now get back to working on that boat. I want to see it on the water before my son goes to college. Sorry, couldn't resist. Have a great weekend.
05-29-2006 | 09:45 AM
#34
Thread Starter
Registered
Joined: Dec 2002
Posts: 3,705
Likes: 0
From: Kankakee Illinois
Re: Drive stand project.
Originally Posted by Magic Medicine
Those stands look nice, now get back to working on that boat. I want to see it on the water before my son goes to college. Sorry, couldn't resist. Have a great weekend.
I'm on it...
05-29-2006 | 10:33 AM
#36
Thread Starter
Registered
Joined: Dec 2002
Posts: 3,705
Likes: 0
From: Kankakee Illinois
Re: Drive stand project.
Originally Posted by Magic Medicine
I need to get on it as well, I won't have the parts I need till Wed.
What kind of parts do you need to wax and polish?
NOW, Gichyass busy and make something shinny while you're waiting for the parts!!!
05-29-2006 | 10:39 AM
#37
Thread Starter
Registered
Joined: Dec 2002
Posts: 3,705
Likes: 0
From: Kankakee Illinois
Re: Drive stand project.
Roger, your stands are awsome, I think you could put the whole boat on them and they wouldnt even feel it....great job [/QUOTE]
NOW ya' tell me. After I spent all my money on a trailer!!!!!
Thanks for the kind words.
[/QUOTE]NOW ya' tell me. After I spent all my money on a trailer!!!!!
Thanks for the kind words.
05-29-2006 | 11:03 AM
#40
Registered
Joined: Mar 2002
Posts: 3,459
Likes: 1
From: Winnipesaukee
Re: Drive stand project.
Wow those are nice but man thats alot of work for something that gets covered with grease and overspray.. I made one in less than an hour out of 2x4's that ive been using for 5 years now .. The top has a slot you can sit the skeg in or flip it over and has a larger hole for the upper to sit in ..
Ill get a pic later it was easy to make and has been used to rebuilt and paint a variety of different lowers
Ill get a pic later it was easy to make and has been used to rebuilt and paint a variety of different lowers
