and if there is any adheasive left, use 3M or rapid-tac adheasive remover...they both work great

i have a extra box of 2 i can send ya..

Snapon sells them.

Ordered my 3M "eraser" from the NAPA store down the street from me...think it was about 25 bucks. Best 25 bucks I've ever spent.

Got one right here.......3M #07499 needs an arbor to attach to drill

Works great with absolutely no damage to the paint or gel coat

My brother owns Rogo Fastner Company,you may have seen his products on Orange County Chopper.He sells the erasers and the tools that only lets it spin at the recomended speed.I have used it many times and it works great.His eraser works better then the 3m ones I used when I worked in the body shop.I live in N.J and could lend you the tool if you would like or he sells the complete kit.He also carries all stainless fastners if you need.Give me a call If I can help you.

Anthony
1-732-921-3355

i use the WURTH company product... it is the best... the key is holding pressure on the wheel and a somewhat slow speed
combined.... a wheel can egg on you real quick if not placed to surface properly.....

Appreciate the offer, but I already did the job I needed to last Spring. (De-striping my Dad's boat.)

Offer is open to any one else in the forum!!!