How to remove bottom paint?
#11
Registered
iTrader: (1)
Re: How to remove bottom paint?
If scraping it off doesn't work. I know it is not a DIY but if soda blasting would remove it & if you could get it done for a reasonalble price it would Definatly be money well spent ! especially if it has 4 coats of bottom paint on it. Trust me sanding off 4 layers of anything is not much fun especailly if it is overhead sanding such as the bottom of a boat , I don't care what kind of resparator you use the crap will be all over you.
#12
Banned
Join Date: Sep 2001
Location: Deland, Florida
Posts: 25,191
Likes: 0
Received 0 Likes
on
0 Posts
Re: How to remove bottom paint?
Originally Posted by SS930
Does that work on bottom paint???
#13
Banned
Join Date: Sep 2001
Location: Deland, Florida
Posts: 25,191
Likes: 0
Received 0 Likes
on
0 Posts
Re: How to remove bottom paint?
I scraped on this one for a day, and then rented a pressure washer with a sand blasting attachement. It worked much better, but be careful on covex corners, it's easy to eat through the gelcoat. It was on a trailer, so there was still a bunch I had to scrape and sand off later. Used 550 pounds of sand.
Never again, I don't care how good a deal I think the boat is.
Never again, I don't care how good a deal I think the boat is.
#15
Registered
Re: How to remove bottom paint?
May want to try Peel away Marine safety strip
Last edited by Playn; 10-17-2006 at 09:15 PM. Reason: repaired link
#16
Registered
Thread Starter
Re: How to remove bottom paint?
Originally Posted by Playn
May want to try Peel away Marine safety strip
Thread
Thread Starter
Forum
Replies
Last Post
1stfntn
Fountain
2
05-11-2004 07:48 PM