Go Back  Offshoreonly.com > General Discussion > General Boating Discussion
Centrifical Supercharger Sound ! >

Centrifical Supercharger Sound !

Notices

Centrifical Supercharger Sound !

Thread Tools
 
Old 12-04-2006, 11:55 AM
  #31  
Registered
Thread Starter
iTrader: (1)
 
littledcsrodshop's Avatar
 
Join Date: Apr 2005
Location: TN
Posts: 2,197
Likes: 0
Received 3 Likes on 3 Posts
Default Re: Centrifical Supercharger Sound !

Originally Posted by articfriends
I'm running a baja 272. The best it has ran is 92.8 mph gps,5800 rpm's,1.50 drive w/32 pitch 4 blade labbed prop,it will run 89 ish any day of the week w/4 people and 3/4 tk of gas. The video was of boat idling in driveway after installing a stellings box this past summer while checking for leaks,bleeding the steering lines out,etc. I usually run ggb mufflers,in the video they weren't back on yet. The sound from thje cockpit is much different,when idling it is like others described,there is a slight ringing noise from blower rattling the step up gears along with a steady slight whine. At wot throttle is sounds sorta like a turbine,Smitty
What drive are you running ? looks like a bravo ( I would assume an XR.) Any idea what your boat weighs ?
I assumed that I would get some whinning sound which is perfectly fine with me. I was mainly woundering how much cam chop it would cut out , which from the rear it doesn't sound like it cut too much out. Do you know the specs. on the cam you are running ? Have you ever had your engine on a dyno ? Sorry for all of the questions it just that it is winter & cold so it makes for good computor racing !!
littledcsrodshop is offline  
Old 12-05-2006, 12:08 AM
  #32  
Platinum Member
Platinum Member
iTrader: (1)
 
articfriends's Avatar
 
Join Date: Jun 2004
Location: frankenmuth michigan
Posts: 7,141
Received 817 Likes on 374 Posts
Default Re: Centrifical Supercharger Sound !

Originally Posted by littledcsrodshop
What drive are you running ? looks like a bravo ( I would assume an XR.) Any idea what your boat weighs ?
I assumed that I would get some whinning sound which is perfectly fine with me. I was mainly woundering how much cam chop it would cut out , which from the rear it doesn't sound like it cut too much out. Do you know the specs. on the cam you are running ? Have you ever had your engine on a dyno ? Sorry for all of the questions it just that it is winter & cold so it makes for good computor racing !!
Cam is hyd roller around 230/238 at.050 and .610 lift,RMbuilder spec'd it if you want exact numbers on a cam custom built for your motor he is very good. Motor made a little under 950 hp on tyler crocketts dyno at 5700 and a little over 950 ftlbs tq at 4700. Tq band was 800 plus ft lbs from 3500 past 5800. Outdrive is a bravo style with every upgrade part max marine worx sells plus recently a special gear treatment I been experimenting with on the lower gears. I repair my own drives and have a full out max worx drive for a spare too. Most their parts along proper,exacting clearences will help a bravo live for a while in a single v(mine is around 5500-6000 lbs w/fuel and passengers) with some pretty healthy power.The mufflers help my boat idle better and do not slow it down whatsoever,i just had them off in the video because we were in process of putting boat back together and they weren't on at the time,Smitty
articfriends is offline  
Old 12-05-2006, 08:20 AM
  #33  
Registered
 
Join Date: Feb 2004
Location: MT. JULIET, TN.
Posts: 3,710
Received 2 Likes on 1 Post
Talking Re: Centrifical Supercharger Sound !

My M3SC sounds like two wild pigs f*cking!
kennyo is offline  
Old 08-14-2013, 04:17 PM
  #34  
Registered
iTrader: (1)
 
Join Date: Jun 2009
Location: Kirkland, WA
Posts: 426
Likes: 0
Received 0 Likes on 0 Posts
Default

vortech, resurrecting a 6 year old thread lol

http://www.youtube.com/watch?v=Sl-eY4bQDNA
launchpad475 is offline  
Old 08-14-2013, 09:07 PM
  #35  
Registered
 
Join Date: Aug 2005
Location: Point Pleasant/Demarest NJ
Posts: 1,100
Received 36 Likes on 21 Posts
Default

I really like the Procharger F3R reverse rotation, with a custom made intercooler and 600 cubic inches.

Some of these cars make 50psi of boost

http://www.youtube.com/watch?v=FfkBG...C1495C&index=6
Pro1 is offline  
Old 08-15-2013, 11:12 AM
  #36  
mgh
Registered
iTrader: (2)
 
Join Date: Jul 2010
Location: MI
Posts: 672
Likes: 0
Received 0 Likes on 0 Posts
Default

http://www.youtube.com/watch?v=aHsenC6TkAU

HP500, Aluminum Heads, M1 w/ intercooler, 3psi
mgh is offline  
Old 08-15-2013, 11:42 AM
  #37  
Registered
 
Join Date: Jun 2010
Location: Central IL / Green Bay, WI
Posts: 1,119
Likes: 0
Received 2 Likes on 2 Posts
Default

Originally Posted by launchpad475
vortech, resurrecting a 6 year old thread lol

http://www.youtube.com/watch?v=Sl-eY4bQDNA
Man, look at all that room around the engine to work!
Wasted Income is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
bichaum
General Q & A
31
02-08-2008 05:26 PM
Bryan Rose
General Q & A
5
11-14-2006 03:28 PM
JJONES
General Q & A
8
06-29-2005 06:32 PM
dropthehammer
General Q & A
8
02-19-2004 12:18 AM
rocksolid
General Q & A
5
02-26-2002 05:08 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



Quick Reply: Centrifical Supercharger Sound !


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.