Coolerman

Didn't TAOD paint Freedom US-1?

StraightJacket

Just go spend about 500.00 on some Black epoxy primmer and piss off the whole Skater nation. Who cares what it looks like if its fast

40FlatDeck

I having my 40 completely stripped right now and am deciding on something to go with. I think I'm staying with 4 or 5 colors and pretty simple, not much shading so it's easy to touch up.

GATORONE

yes

bripar77

40FlatDeck have you found a painter? Any quotes from Painters?

40FlatDeck

Well, when I got the boat there were alot of paint fixes, plus, around the engine compartments there were/are stress cracks. I have been able to find out the current paint job is like the 4th one so there is ALOT of paint. We decided instead of fixing the paint for the 25th time we would completely strip it, fill all the cracks and start over with a paint scheme we like.
I am having Wes from Trident Boats do all of the work. First, he is a good friend and I completely trust him, and two, he can fix the boat with his epoxy infusion which is *****en.
If you are looking for a complete job and the painter is going to de-rig the boat for you, I would be ready for a 35k-55k job, at least that is what I was finding.

bripar77

Thanks 40FlatDeck. I will be DeRigging for the painter. Good luck with yours. What year is it?

bripar77

40FlatDeck where do you normally run the boat? Do you ever get to Havasu or Lake Mead?

Enforcer2

Definetly like the sketch. The existing is nice, but I like the blended look better.

Sydwayz

iTrader: (1)

We have a division of Active Thunder; INXS Motorsports; that will design and paint anything that you can get to Pompano Beach, FL.

Give me an idea of what you want/need done via PM, and I'll get back to you.