500 efi bolt on hp?

Reply Subscribe

Thread Tools

03-28-2008 | 06:05 AM

#11

Canada Jeff

Registered

Joined: Dec 2003

Posts: 1,566

Likes: 0

From: Ottawa, Ontario,Canada baby!

Quote:

Originally Posted by Pantera28-650HP

Call Bill at Ateco (847)623-2737. Has a bolt on kit good for 600+ HP includes the reflashed ECU. Under $ 5,000.00.

What is "bolt on" ? The stock heads won't flow enough with the stock cam to get you anywhere near 600 hp! So I asume this kit has new heads and cam right?

The biggest deal with this engine hangem, is getting the computer perfect. Go to an experienced builder. Even with a whipple, the computer won't be perfect, unless you can tune it on a dyno. I speak from experience.

Add a Whipple, dyno tune it, and your MORE than satified.

Then go buy a speare drive :-)

03-28-2008 | 07:33 AM

#12

gsmith9898

Registered

Joined: Mar 2005

Posts: 1,892

Likes: 1

From: tulsa, oklahoma

Just put on the pro chargers and be done with it. Oh yea and I just happen to have a pair that I would part with.

03-28-2008 | 02:14 PM

#13

45sonic

Registered

Joined: Dec 2002

Posts: 3,402

Likes: 1

From: Northern VA

Quote:

Originally Posted by gsmith9898

Just put on the pro chargers and be done with it. Oh yea and I just happen to have a pair that I would part with.

Call me when you get time

301-674-2773

03-28-2008 | 02:31 PM

#14

Dwane

Registered

Joined: Nov 2002

Posts: 221

Likes: 0

From: Ohio

Just put on the pro chargers and be done with it

03-28-2008 | 04:46 PM

#15

Donzilla

Registered

Joined: Jan 2002

Posts: 874

Likes: 0

From: LBI,NJ

Quote:

Originally Posted by Strip Poker 388

Your best bet is Mark at Precision Marine in Kenner,La(504-469-7463),he can do 600 or 640 pretty reasonable and dependable.He can dyno and tune the ECU and if needed fine tune it at the lake.

Rob

I have 2 mefi 3 ecm off my 500 efi's done by him 800.00 each anyone needs them.

03-28-2008 | 05:03 PM

#16

Clay Washington

Registered

Joined: Dec 2000

Posts: 6,986

Likes: 0

From: Austin, Texas

Quote:

Originally Posted by BAJA WILL

I would say leave it, or whipple it. No real in the middle with out pulling the motor apart, and then your at as much as a whipple would be but don't have one.

My 2 cents

WILL

Agreed!