700 SCi Question.
07-02-2008, 07:22 PM
#11
Registered
Join Date: Oct 2000
Location: Fresno, CA, 93722, USA
Posts: 1,436
Likes: 0
Received 4 Likes
on
4 Posts
You must also clean the IAC filter (on Whipple kits) a minimum of once a season, otherwise it won't get enough air and will idle all over the place.
Thanks,
Dustin
07-02-2008, 07:36 PM
#12
Registered
Join Date: Nov 2005
Location: Farmington, MO
Posts: 213
Likes: 0
Received 0 Likes
on
0 Posts
You have to adjust the idle with a scan tool then. In neutral, adjust the mechanical stop so the IAC rest between 0-20 counts (have to let it stabilize). Then, in gear, it will go between 80-140 depending on prop and gear ratio.
You must also clean the IAC filter (on Whipple kits) a minimum of once a season, otherwise it won't get enough air and will idle all over the place.
Thanks,
Dustin
You must also clean the IAC filter (on Whipple kits) a minimum of once a season, otherwise it won't get enough air and will idle all over the place.
Thanks,
Dustin
07-02-2008, 07:57 PM
#13
Gold Member
Gold Member
No problems with mine but it does help to pause between shift manuevers. i.e do not go directly from forward to reverse, pull to neutral for a moment then back into gear.
07-02-2008, 08:40 PM
#14
Registered
Join Date: Oct 2007
Location: Mahopac New York
Posts: 969
Likes: 0
Received 0 Likes
on
0 Posts
Chuck,
Give me a call tomorrow at the marina. I had the same issue with one of the boats we had in the shop.
Tom/Charlie
Give me a call tomorrow at the marina. I had the same issue with one of the boats we had in the shop.
Tom/Charlie
Last edited by MahopacMarine; 07-02-2008 at 08:47 PM.
07-02-2008, 08:52 PM
#17
Registered
Join Date: Oct 2007
Location: Mahopac New York
Posts: 969
Likes: 0
Received 0 Likes
on
0 Posts
