Motor Damage During Shipping ??????
03-02-2009 | 11:46 AM
#241
Thread Starter
Banned
Joined: Sep 2007
Posts: 12,849
Likes: 3
From: Frankfort,ill
AS to the blowers i sold you-larry did step in and convince me to sell you the adapter plate and the snout because i would not be using them for the whipple set up.I am now sorry i didnt charge you for them instead of giving them to you.
Eric is right -you have been tellig half truths on this thread
Bill -this BS needs to end.GARY
Eric is right -you have been tellig half truths on this thread
Bill -this BS needs to end.GARY
03-02-2009 | 11:55 AM
#243
Registered
Joined: Jun 2006
Posts: 2,057
Likes: 0
Wow. All this due to one persons mistake (missing bolt). Amazing how it has escalated to the point it is now. A lot of hard feelings and animosity building. A shame, really is.
Not to minimize the extent of damage done, but mistakes happen. I am sure all involved have made mistakes, I sure have. No bash directed at anyone, just sad to see this conflict materialize over such a small thing.
Good luck with your engines Bill, I am sure you will be very happy with them when they are up and running. I have seen Eriks\40 Skater at Havasu and his engines were way impressive.
Sam
Not to minimize the extent of damage done, but mistakes happen. I am sure all involved have made mistakes, I sure have. No bash directed at anyone, just sad to see this conflict materialize over such a small thing.
Good luck with your engines Bill, I am sure you will be very happy with them when they are up and running. I have seen Eriks\40 Skater at Havasu and his engines were way impressive.
Sam
03-02-2009 | 11:58 AM
#244
Thread Starter
Banned
Joined: Sep 2007
Posts: 12,849
Likes: 3
From: Frankfort,ill
As far as dream land you have never met me ,so save it and tell me all about it and one of the runs over a few cocktails
03-02-2009 | 12:06 PM
#245
Banned
Joined: Oct 2006
Posts: 5,844
Likes: 0
From: Bradenton Florida
Think what you want Bill. Its always someone elses fault.????? So i guess i packaged them up ha ???? Funny thing is there the best , but my 16, & 18 year olds packaged,boxed,crated, bolted to MY STANDS and they made it to arizona OK
As far as dream land you have never met me ,so save it and tell me all about it and one of the runs over a few cocktails
As far as dream land you have never met me ,so save it and tell me all about it and one of the runs over a few cocktails
03-02-2009 | 12:09 PM
#246
Thread Starter
Banned
Joined: Sep 2007
Posts: 12,849
Likes: 3
From: Frankfort,ill
[QUOTE=skater40;2812079]
They were freshened and even supplied reciepts to the buyer ,but running a 1271 at 39% overdriven might not have helped it ... your a motor guy were you spinning the 1671s anywhere near 39% ??? enquiring minds wanna know ??
they were a mess ? they had 7.5-1 pistons and needed a valve job and they were a mess ...OK where are we getting this 900 hp before ??? did you dyno one before they were built ??? funny thing is we did dyno before they shipped ... and they say 1153 power, 1009 torque dated 10/31 with a 1.3 inertia factor and i will post it .... so wheres the 900 # your talkin bout coming from ??
Again-selective memory.You told me that your blowers were 12-71 and that they were freshened 10 hours ago-yet you advertised them as 14-71s.
Your motors made 900 hp and now make 1300hp.They were a mess.Larry gave you a great job of straigtening them out.
Keith Eickert even offered to make you a new tube as did larry but you refused and continue to slander him.I wouldnt be surprised if you get served with a arizona lawsuit at desert storm.You certinly deserve to be sued.
Your motors made 900 hp and now make 1300hp.They were a mess.Larry gave you a great job of straigtening them out.
Keith Eickert even offered to make you a new tube as did larry but you refused and continue to slander him.I wouldnt be surprised if you get served with a arizona lawsuit at desert storm.You certinly deserve to be sued.
they were a mess ? they had 7.5-1 pistons and needed a valve job and they were a mess ...OK where are we getting this 900 hp before ??? did you dyno one before they were built ??? funny thing is we did dyno before they shipped ... and they say 1153 power, 1009 torque dated 10/31 with a 1.3 inertia factor and i will post it .... so wheres the 900 # your talkin bout coming from ??
03-02-2009 | 12:10 PM
#247
Banned
Joined: Oct 2006
Posts: 5,844
Likes: 0
From: Bradenton Florida
[QUOTE=RunninHotRacing158;2812103]
They were freshened and even supplied reciepts to the buyer ,but running a 1271 at 39% overdriven might not have helped it ... your a motor guy were you spinning the 1671s anywhere near 39% ??? enquiring minds wanna know ??
they were a mess ? they had 7.5-1 pistons and needed a valve job and they were a mess ...OK where are we getting this 900 hp before ??? did you dyno one before they were built ??? funny thing is we did dyno before they shipped ... and they say 1153 power, 1009 torque dated 10/31 with a 1.3 inertia factor and i will post it .... so wheres the 900 # your talkin bout coming from ??
I LOVE IT 
They were freshened and even supplied reciepts to the buyer ,but running a 1271 at 39% overdriven might not have helped it ... your a motor guy were you spinning the 1671s anywhere near 39% ??? enquiring minds wanna know ??
they were a mess ? they had 7.5-1 pistons and needed a valve job and they were a mess ...OK where are we getting this 900 hp before ??? did you dyno one before they were built ??? funny thing is we did dyno before they shipped ... and they say 1153 power, 1009 torque dated 10/31 with a 1.3 inertia factor and i will post it .... so wheres the 900 # your talkin bout coming from ??
03-02-2009 | 12:20 PM
#248
Thread Starter
Banned
Joined: Sep 2007
Posts: 12,849
Likes: 3
From: Frankfort,ill
[QUOTE=skater40;2812079][QUOTE=RunninHotRacing158;2812038]
Your motors made 900 hp and now make 1300hp.They were a mess.
So where are you coming up with the 900 Hp motor before ??? heres the dyno sheets for motor ran before they were sent to Arizona .... Dayum it sure is amazing how i have paperwork,dates,times, emails
Your motors made 900 hp and now make 1300hp.They were a mess.
So where are you coming up with the 900 Hp motor before ??? heres the dyno sheets for motor ran before they were sent to Arizona .... Dayum it sure is amazing how i have paperwork,dates,times, emails
03-02-2009 | 12:25 PM
#250
Thread Starter
Banned
Joined: Sep 2007
Posts: 12,849
Likes: 3
From: Frankfort,ill
[QUOTE=skater40;2812079]
Oh Sorry i missed the part about the Lawsuit i was buzy getting the dyno sheet , So i should run and hide ??? Stephanie @ LARRYS ENGINE & MARINE chose to have ERIK as her cheerleader when it would of been nipped in the bud in the phone call at 8.30 and handled man to man ..... have them papers there i'm easy to find BIG Daddy ...
Again-selective memory.You told me that your blowers were 12-71 and that they were freshened 10 hours ago-yet you advertised them as 14-71s.
Your motors made 900 hp and now make 1300hp.They were a mess.Larry gave you a great job of straigtening them out.
Keith Eickert even offered to make you a new tube as did larry but you refused and continue to slander him.I wouldnt be surprised if you get served with a arizona lawsuit at desert storm.You certinly deserve to be sued.
Your motors made 900 hp and now make 1300hp.They were a mess.Larry gave you a great job of straigtening them out.
Keith Eickert even offered to make you a new tube as did larry but you refused and continue to slander him.I wouldnt be surprised if you get served with a arizona lawsuit at desert storm.You certinly deserve to be sued.
...
