BIG Time motor problem ...any ideas ?????
#221
#222
Registered
Joined: Feb 2005
Posts: 19
Likes: 0
Runninghot I have the ultimate setup for ya. Forget the turbines and big blocks!!! I cant believe i didnt think of this before. This is almost border line genious!! Here is my idea we find some slightly used russian nuclear sub reactors!!!! Not sure how we will rig em but we will worry about that later. Just think 20 years before refueling!!!
#223
Thread Starter
Banned
Joined: Sep 2007
Posts: 12,849
Likes: 3
From: Frankfort,ill
#225
Thread Starter
Banned
Joined: Sep 2007
Posts: 12,849
Likes: 3
From: Frankfort,ill
theres a local pokerrun on aug 15 in the bay borden light pr you can have my seat in Gerrys boat if its ok with him if he is full
, they start the day before at the tiki bar at the marina and crash on the boats or get a room up the street
so its two parties one before and one after the run with two bands and some person from key west is showing up this year to sing I heard right after the run for 2 hours
, once you ride turbine THERES NO GOING BACK
, they start the day before at the tiki bar at the marina and crash on the boats or get a room up the street
so its two parties one before and one after the run with two bands and some person from key west is showing up this year to sing I heard right after the run for 2 hours
, once you ride turbine THERES NO GOING BACK
#226
Thread Starter
Banned
Joined: Sep 2007
Posts: 12,849
Likes: 3
From: Frankfort,ill
D!Kweed absolutely
Problem identified would be dont send your motors to LARRY & STEPHANIE PETO @ LARRYS ENGINE & MARINE in Tucson ARIZ if you want your chit to run and still keep boating
we'll build and dyno these motors and will be TURNKEY drop in and have fun ...
OOPS we here at Larrys forgot to set the timing at 27 instead of 34 degrees on your BIG CHIEF motors but next time around 27 degrees is great not higher then 28 Degrees
#227
Registered

Joined: Jun 2008
Posts: 52
Likes: 0
From: So. Cal
D!Kweed absolutely
Problem identified would be dont send your motors to LARRY & STEPHANIE PETO @ LARRYS ENGINE & MARINE in Tucson ARIZ if you want your chit to run and still keep boating
we'll build and dyno these motors and will be TURNKEY drop in and have fun ...
OOPS we here at Larrys forgot to set the timing at 27 instead of 34 degrees on your BIG CHIEF motors but next time around 27 degrees is great not higher then 28 Degrees
Problem identified would be dont send your motors to LARRY & STEPHANIE PETO @ LARRYS ENGINE & MARINE in Tucson ARIZ if you want your chit to run and still keep boating
we'll build and dyno these motors and will be TURNKEY drop in and have fun ...
OOPS we here at Larrys forgot to set the timing at 27 instead of 34 degrees on your BIG CHIEF motors but next time around 27 degrees is great not higher then 28 Degrees
#228
Registered
Joined: Sep 2008
Posts: 967
Likes: 1
From: Newark, DE
Bill, You got a fan He is following you like a celebrity!!!
Can I have your autograph? He is putting his money on Larry,,, Wonder if anyone else ever experienced Larry's good side? I would like to hear more from other people that were unsatisfied!! Wonder how many??
#229
its at bordenlightmarina.com and on the left side theres a list of stuff go down to activities press on there and it lists the pr. better yet go to northeast page here and there is 3 threads on it and link the long thread by slick stinger about fallriver pr same thing has pics from past that I took and mike and I posted theres vid on one of the threads. any Qs post back here
big daddy whos yah daddy
its in the[ boating by region] threads here if that helps
big daddy whos yah daddy
its in the[ boating by region] threads here if that helps
Last edited by AIR TIME; 08-02-2009 at 01:50 PM.
#230
Thread Starter
Banned
Joined: Sep 2007
Posts: 12,849
Likes: 3
From: Frankfort,ill


Last edited by RunninHotRacing163.1; 08-02-2009 at 02:22 PM.



