Fastest Single In Toms River, NJ Area?
#181
Registered
Joined: Aug 2005
Posts: 6,306
Likes: 1
From: Between A Womans Leggs in IL
#182
Registered

Joined: Mar 2007
Posts: 936
Likes: 9
From: New Jersey
Your not going to blow that drive up. It's a pretty light boat
your fine i had alot more power with a stock bravo and lasted a long time. I 'm guessing it is a revolution 4 blade and if that is the case it is bigger than a 25 more like a 26.5 or so.A bravo one is alittle smaller than advertised but your prop is alittle more. So your slip is not as high as you think. It's more like 13or so at 6 grand if that is the correct speed you are doing.If your motor makes power to 6400 why would you not hold it wide open to see what it's got. If it did it on the dyno and danny built it that way then why not spin it that high.I would try a 28 bravo 0ne that might be the ticket if what
you said is correct
your fine i had alot more power with a stock bravo and lasted a long time. I 'm guessing it is a revolution 4 blade and if that is the case it is bigger than a 25 more like a 26.5 or so.A bravo one is alittle smaller than advertised but your prop is alittle more. So your slip is not as high as you think. It's more like 13or so at 6 grand if that is the correct speed you are doing.If your motor makes power to 6400 why would you not hold it wide open to see what it's got. If it did it on the dyno and danny built it that way then why not spin it that high.I would try a 28 bravo 0ne that might be the ticket if what
you said is correct
#184
Registered
Joined: Oct 2008
Posts: 617
Likes: 0
From: Toms River, NJ
#186
Thread Starter
Registered
Joined: Sep 2010
Posts: 95
Likes: 0
From: NJ
thanks guys for all the info. i would like to try a 28p bravo I and a 29p mirage plus b/c i herd the older fountains may work better with a 3blade? i made peak torque at 5100-5300 645tq 650hp. at 6300-6400 700hp 585tq. at 6000 692hp 605tq. so by playing it safe at 6k im only down 8hp but up 20tq. balanced and polished stock forged gm crank with scat forged h-beam rods so i think im good to go. we built a 510 with good hp and a little less torque b/c the boat isnt that heavy and i didnt want to have problems with the drive. 700hp in basically a 24footer on the barnegat = not running 6k that often.
#187
Any updates? Seems like the smack talking died an untimely death. Not that I have been out all that much but I have yet to see any singles TEARING up the bay. I did see a Phantom a week or so ago that I have not seen in the area. He was looking for a run but I had my 5 and 8 yr olds on the boat so thats a no go.
#190
Registered
Joined: Oct 2008
Posts: 617
Likes: 0
From: Toms River, NJ



