A few pics of problem child...
#6
Registered
Thread Starter
Join Date: Oct 2000
Location: On the river
Posts: 3,372
Likes: 0
Received 0 Likes
on
0 Posts
Thanks guys
Birdog.. I cut it to size then used a buddies brake on it... only had to bend the peices on the floor, I put a 3 inch lip on them to clean up the edge where the floor meets the bilge.. I just used a skill saw to cut it.. LOL!! nice and loud you won't have any neighbors that like you after that glued the sides on with a whole tube of 3M 5200 on each side ! screwed and sealed the peices on the floor..
Birdog.. I cut it to size then used a buddies brake on it... only had to bend the peices on the floor, I put a 3 inch lip on them to clean up the edge where the floor meets the bilge.. I just used a skill saw to cut it.. LOL!! nice and loud you won't have any neighbors that like you after that glued the sides on with a whole tube of 3M 5200 on each side ! screwed and sealed the peices on the floor..
#8
Registered
Join Date: May 2001
Location: Minneapolis, Minnesota
Posts: 1,129
Likes: 0
Received 0 Likes
on
0 Posts
Traviss, You've got quite the collectable there. One of the few PowerPlay's by PowerQuest, or what became PowerQuest. We met Kevin Hirdes and Todd Kamps shortly after they had to change their name. Cool story.
Nice looking boat. Engine compartment looks great
Nice looking boat. Engine compartment looks great
Thread
Thread Starter
Forum
Replies
Last Post
BAD-HABIT
General Q & A
79
07-04-2003 10:28 PM