Where ARE all the LSx motors hiding???
#213
Registered

Joined: Jul 2008
Posts: 1,654
Likes: 29
#215
Registered
Joined: Mar 2010
Posts: 229
Likes: 0
From: QLD
LS-based engines currently in full production:
Crusader 6.0/375 hp inboard
Ilmor 6.0/382 hp inboard
Ilmor 6.2/430 hp inboard
Ilmor 7.4/522 hp inboard (Basis of the upcoming 570.)
Forgot one.
PleasureCraft 6.0/409 hp inboard
PleasureCraft 6.0/450 hp inboard
PleasureCraft 6.2/550 hp inboard(supercharged)
Volvo Penta 6.0/380 hp sterndrive
Of all these, the Ilmor 7.4/522 is the only LS-X engine.
Crusader still lists 8.1 (496) engines on its web site. Volvo Penta does not, but is the only company to offer a sterndrive LS package so far.
Crusader 6.0/375 hp inboard
Ilmor 6.0/382 hp inboard
Ilmor 6.2/430 hp inboard
Ilmor 7.4/522 hp inboard (Basis of the upcoming 570.)
Forgot one.
PleasureCraft 6.0/409 hp inboard
PleasureCraft 6.0/450 hp inboard
PleasureCraft 6.2/550 hp inboard(supercharged)
Volvo Penta 6.0/380 hp sterndrive
Of all these, the Ilmor 7.4/522 is the only LS-X engine.
Crusader still lists 8.1 (496) engines on its web site. Volvo Penta does not, but is the only company to offer a sterndrive LS package so far.
Mast Motorsport 600hp ls motor, full marinised.
#216
Registered
Joined: May 2012
Posts: 2
Likes: 0
http://ls1tech.com/forums/attachment...-boat-hal1.jpg
I've been running mine for a few years and am in the process of building another.
I've been running mine for a few years and am in the process of building another.
Last edited by carykard; 10-11-2013 at 02:24 PM.
#217
Registered

Joined: Oct 2000
Posts: 2,797
Likes: 399
http://ls1tech.com/forums/attachment...-boat-hal1.jpg
I've been running mine for a few years and am in the process of building another.
I've been running mine for a few years and am in the process of building another.
#220
what he said. i have a bone stock 420hp all alum L92 engine with 60k on it, im hoping to find an 18ft donzi to stuff it in. there are companies that make a wiring harness to connect the engine to the ecu, summit also sells a kit with msd ign box to run the ign and a single plane manifold to stick a 4150 holley on for about 700 bucks. i have a complete car so i was planing to remove the entire wiring harness and eliminate all the crap i dont need... i found exhaust and risers for under 400 bucks.... just need to find the right project boat...rm



Must be a blast to drive. What's the specs on your LSx?