Bayliner vs Apache
#41
Registered

Joined: Jun 2004
Posts: 3,397
Likes: 21
From: Somewhere in Ohio
#42
Registered

Joined: Jun 2004
Posts: 3,397
Likes: 21
From: Somewhere in Ohio
#43
Registered

Joined: Jun 2004
Posts: 3,397
Likes: 21
From: Somewhere in Ohio
#44
Registered
Joined: Aug 2011
Posts: 433
Likes: 0
From: Crane Hill, AL
Is that the new high performance, slick, bottom paint with wax overlay finish on the built better than a brick sh!t house, light as a feather sponsons? I mean who makes a trailer that cherry?!?!?!?
You know what lays under that tarp? That's right, Don and Reggies boogieman. Be careful if you go near, gold chains tend to evaporate into then air.
You know what lays under that tarp? That's right, Don and Reggies boogieman. Be careful if you go near, gold chains tend to evaporate into then air.
#46
Registered
Joined: Jul 2010
Posts: 504
Likes: 0
From: Centennial, CO
#47
Registered
Joined: Sep 2013
Posts: 1,879
Likes: 8
From: Southeast Michigan
Guys. Guys! You gotta go by the numbers...
NADA for both boats- 1997 vintage...
Entry level Apache Eagle- $52k (NADA MSRP) minus $12k (NADA residual)=depreciation of $40,000
Mid-level I/O Bayliner 1750LS- $12k (NADA MSRP) minus $3.5k(NADA residual)= depreciation of $8500...
Hands down, Bayliner is the winner... I hope I don't create a run on the used Bayliner market with this info, but I figured you guys should be "in the know"...
OP, I'd suggest a vintage Capri with the FORCE/Chrysler outboard... I hear scrap prices for aluminum are through the roof!
OSO> Forum> Owner's Forum> Bayliner. Let us know what you find out...
NADA for both boats- 1997 vintage...
Entry level Apache Eagle- $52k (NADA MSRP) minus $12k (NADA residual)=depreciation of $40,000
Mid-level I/O Bayliner 1750LS- $12k (NADA MSRP) minus $3.5k(NADA residual)= depreciation of $8500...
Hands down, Bayliner is the winner... I hope I don't create a run on the used Bayliner market with this info, but I figured you guys should be "in the know"...
OP, I'd suggest a vintage Capri with the FORCE/Chrysler outboard... I hear scrap prices for aluminum are through the roof!
OSO> Forum> Owner's Forum> Bayliner. Let us know what you find out...
Last edited by Speedracer29; 01-24-2014 at 03:41 PM.


