Craigslist Gold!
#1901
Registered

Joined: Jun 2007
Posts: 7,309
Likes: 1,815
From: Merritt Island, FL
I freagin love this thing!
You can tell it was still early enough that they designed the interiors around the top end cars of the day.
Hadnt don’t the nautical bend yet.
https://www.ebay.com/itm/DONZI-21GT-...E/124174577704
You can tell it was still early enough that they designed the interiors around the top end cars of the day.
Hadnt don’t the nautical bend yet.
https://www.ebay.com/itm/DONZI-21GT-...E/124174577704
but the throttle is on the left!!!!!
OMG how would you drive it?
lmao
#1902
Registered

Joined: Mar 2002
Posts: 4,470
Likes: 2,107
From: Milton, Fla!
Funny how some people are about that.
I built a 100 MPH 17’ vee bottom OB yrs ago and struggled w/that part of set up.
Was an open stringer boat w /steering on right.
W/the floor being the top side of the bottom, there was no place for a foot throttle on the right of driver.
Only place it would work (for Rt hand steer) was for left foot operation.
I threw another wrench in the gears when I decided to make the seats convertible.
I wanted both, side by seating for lake play and single/center seat for drag racing.
Built a grid for the seats w/clevis pins to move them.
I then mounted the wheel 1/2 way between where should be for center steer and side side by side.
So it was a few inches from both normal locations.
Had no clue if any of it would work.
Maybe it’s just me but it had zero effect on me.
Worked well enough I did it on a 110 MPH 19’ tunnel boat too.
As long as I can reach the wheel, trim buttons and throttle, who cares 😉
I built a 100 MPH 17’ vee bottom OB yrs ago and struggled w/that part of set up.
Was an open stringer boat w /steering on right.
W/the floor being the top side of the bottom, there was no place for a foot throttle on the right of driver.
Only place it would work (for Rt hand steer) was for left foot operation.
I threw another wrench in the gears when I decided to make the seats convertible.
I wanted both, side by seating for lake play and single/center seat for drag racing.
Built a grid for the seats w/clevis pins to move them.
I then mounted the wheel 1/2 way between where should be for center steer and side side by side.
So it was a few inches from both normal locations.
Had no clue if any of it would work.
Maybe it’s just me but it had zero effect on me.
Worked well enough I did it on a 110 MPH 19’ tunnel boat too.
As long as I can reach the wheel, trim buttons and throttle, who cares 😉
#1904
Registered

Joined: Mar 2002
Posts: 4,470
Likes: 2,107
From: Milton, Fla!
#1905
Now , here's a comfy old relic for someone on the other side of the pond looking for a project
https://www.ebay.co.uk/itm/Boat-21-F...UAAOSwXQRexOPs
The seller's 2nd last sentence of the ad text kills me ..
At least he's honest .
https://www.ebay.co.uk/itm/Boat-21-F...UAAOSwXQRexOPs
The seller's 2nd last sentence of the ad text kills me ..
At least he's honest .
#1906
Registered

Joined: Mar 2002
Posts: 4,470
Likes: 2,107
From: Milton, Fla!
Hilarious!
Now , here's a comfy old relic for someone on the other side of the pond looking for a project
https://www.ebay.co.uk/itm/Boat-21-F...UAAOSwXQRexOPs
The seller's 2nd last sentence of the ad text kills me ..
At least he's honest .
https://www.ebay.co.uk/itm/Boat-21-F...UAAOSwXQRexOPs
The seller's 2nd last sentence of the ad text kills me ..
At least he's honest .
#1907
Registered

Joined: Jan 2006
Posts: 3,859
Likes: 791
From: St. Pete Beach, FL
#1908
Registered

Joined: Apr 2015
Posts: 1,268
Likes: 68
#1909
#1910
Registered

Joined: Jun 2007
Posts: 7,309
Likes: 1,815
From: Merritt Island, FL
On another note I wonder how bad the balance would be on something like this, that hull was tweeked to snot for stag BBC mounted low and close to the keel.
Now ALL the power is behind the transom and high,,,,,,, The CG has to be a mess.


