Michael Let me know how you like that flooring ? I am hearing it's not shoe friendly.

Yes it's a soft product BUT no real worry for me bc no one will live to tell they actually wore shoes of ANY kind on my boat. :duel:

sorry for the hijack but what have you heard about his flooring

It's soft nonabsorbent, closed cell EVA material.

I received a 12" x 24" sample of it in the std thickness is 6mm, They also offer 8mm as well as 13mm.
I left my cool gray over black sample outside my front door all weekend & intentionally walked across it for 2 days. It started to have that dingy look to it. This concerned me, not that anyone will be wearing shoes then getting on board but even dirty bare feet could leave a footprint. Alex of Callaway Customs recommended me using some soft scrub and a sponge to remove any remaining dirt & he was right, the soft scrub worked great returning the sample to like new condition.

Sea-Dek cost about 1/3rd Plas-Dek & comes w/ a self adhesive back where as Plas-Dek must be glues down. Should a section or area of Sea-Dek become stained or permanently damaged, just peel it up & order a replacement piece for next to nothing.

ok Thanks

Sea-Dek
 

I've been working closely w/ Alex from Callaway Customs & Nor-Tech on my Sea-Dek flooring. Going with streaked Cool Gray over Black which will give it a Black edge & 1" inset Black 1/4" wide outline.
Faux Teak in the cabin only.

You should be hitting the water soon !!!

Boats completion is falling on Easter week which I already have plans for so I'm hoping to see if see actually floats the following week.

I will be down easter week so i can shake it down for you :D:D

You laugh but who better than to put her thru her paces than an experienced Nor-Tech owner!??