Finally,My 39 Ocean Express Procharged Restor Build !!!
05-14-2019 | 09:46 AM
#31
Registered
Joined: Jun 2007
Posts: 7,336
Likes: 1,838
From: Merritt Island, FL
Hello to everyone we have been away from this forum for about a year. If you remember the soap opera is we are from Mexico and we bought a CAT in the USA.After bouncing between 4 repair shops and being robbed about 17k, after almost loosing the boat and equipment to a dishonest repair shop in Florida we have the boat in Mexico in a warehouse in pieces. As you see here the transom is done and we need to cut the holes for the #6 drives bellhousing.That is the problem we have now. I am looking to see if there is any one in this community that is willing to travel to Guadalajara Mexico and cut the holes and do the xdimensions to instal the #6 drives.After that we can do the rest. We can pay your airfare and $1500 usd per day.This project is a sad situation, never even drov the boat........ and only spending money and begging for help will fix it. 
05-16-2019 | 11:34 AM
#32
Thread Starter
Registered
Joined: May 2017
Posts: 244
Likes: 0
Hello, the 1500$ is about a 8 hour day.We pay your flight to Guadlajara and your stay in the RIU hotel a high quality hotel, someone will pick you up at the hotel and take you to the warehouse everday and we provide lunch beer whatever you need.The main thing is we need to cut the transom and put the outdrives with proper xdimensions, pay in cash.After that we can do the rest. I dont think it would be more than a few days work.The boat now has almost no value without fixing it so we are very motivated.The drives are #6 drives and the transom is about 2 3/4 inch thick
10-26-2019 | 08:23 AM
#34
Registered
Joined: Jul 2007
Posts: 2,640
Likes: 14
From: MI
I believe Mercury sells a Jig to drill the holes and cut the the cutout. All you need is a drill, drill bit, hole saw bit, and a jig saw.
