Quiet Storm, The PSI drives shuld fit your boat with no trouble. I'm trying to remember if I talked to one of the guys from Sonic at the Miami boat show about them trying some PSI drives...???

Anyway, I had a problem mostly because my staggered engines are 22" on center. I could've maybe angles my engines out and taken off my trim tabs and got it to work. We didn't think it was worth messing with on my boat.

Sorry to hear about your troubles on Sat.

So what's people's opinion about a single pulse drive on a 30' v-hull with not such big power, say a 500efi? Does this make sense from a dependability standpoint? Is much power lost?

Thanks Mark

We saw you go by at boaters beach Sunday. We were on MrCigs boat. Peggy fell in love with it. I may have to start looking for a Cig.

I still have three years left on the warranties. I'm not going to change anything until they time out.

How's your drive?

Roger, my drive is fine, my trouble was the shift cable. It melted near the exhaust manifold, I think from when I started it in the spring and my sea water pump went out.

I wanted to stop and say hey, but Linda really didn't want to anchor.

RTtaylor, It would be perfect in that application. and VERY reliable. I rode in Tony's boat. 31' Infinity with 525hp and a single pulse drive. It handled amazing! Both slow and fast.

Prices

For a twin engine boat from Tranny To Props up to 600hp about $22,000 total
Up to 800hp about $32,000 total

We have Singles, Twins, Triples and Quads


rtaylor

31-32' or 8000lb is about max for any single drive anything over that you'll need at least Twins

one of our demo boats is a 31' Infinity your more than welcome to come for a ride and see for yourself

Tony
www.pulsedrive.net

Just a short run down the ditch

Now THAT is a beautiful picture!

It is; nice picture !

Wow! That pic needs to be framed! Awesome.

going, going