B-Max Blackhawk
10-18-2004 | 08:18 PM
#33
Thread Starter
Registered
Joined: Jun 2001
Posts: 80
Likes: 0
From: Grand Rapids, MI
Re: B-Max Blackhawk
HyperBaja: The lower unit, that's why I decided to go with the Blackhawk lower. I had two Blackhawks with broken uppers that I had busted at least four times each. I never broke the lowers, hense the idea of a bullet proof upper with a lower that I have never failed.
Thanks, Tom
Thanks, Tom
10-18-2004 | 08:53 PM
#35
Thread Starter
Registered
Joined: Jun 2001
Posts: 80
Likes: 0
From: Grand Rapids, MI
Re: B-Max Blackhawk
HyperBaja: The gear sets, I would see metal on the magnet in about four hours. The last set was the 1.19 ratio. I pull them before they totally fail. I'll take some pictures to show you.
Tom
Tom
10-18-2004 | 09:48 PM
#36
Registered
Joined: Apr 2004
Posts: 149
Likes: 0
From: Signal Hill, CA
Re: B-Max Blackhawk
Originally Posted by Tom Earhart
HyperBaja: The gear sets, I would see metal on the magnet in about four hours. The last set was the 1.19 ratio. I pull them before they totally fail. I'll take some pictures to show you.
Tom
Tom
way to go with the B-Hawk!! keep us posted
KL
10-20-2004 | 05:58 AM
#40
Registered
Joined: Apr 2002
Posts: 450
Likes: 0
From: Valparaiso, Indiana
Re: B-Max Blackhawk
Tom
No I did not get your reply. Please send again, Dont feel ba, Im most likely worst than you on these darn computers. I still dont know how to send photos. I get white lightning to send for me and I have a HP all in one right here at the house.Maybe some day!!
No I did not get your reply. Please send again, Dont feel ba, Im most likely worst than you on these darn computers. I still dont know how to send photos. I get white lightning to send for me and I have a HP all in one right here at the house.Maybe some day!!
