B-Max Blackhawk
10-20-2004 | 09:39 AM
#41
Registered
Joined: Sep 2002
Posts: 3,606
Likes: 0
From: Lewis Center, Ohio
Re: B-Max Blackhawk
Originally Posted by Tom Earhart
HyperBaja: The gear sets, I would see metal on the magnet in about four hours. The last set was the 1.19 ratio. I pull them before they totally fail. I'll take some pictures to show you.
Tom
Tom
10-20-2004 | 04:55 PM
#43
Registered
Joined: Feb 2001
Posts: 1,519
Likes: 31
Re: B-Max Blackhawk
Nice to see twin turbos again. Tom, your participation on the board is greatly appreciated. Hope to see you in the tech section!
OK, I give up...where's the intercooler?
OK, I give up...where's the intercooler?
Last edited by tomcat; 10-20-2004 at 05:05 PM.
10-22-2004 | 05:06 PM
#44
Thread Starter
Registered
Joined: Jun 2001
Posts: 80
Likes: 0
From: Grand Rapids, MI
Re: B-Max Blackhawk
Tomcat: In that picture it was on the port-side rear floor. On this years version it's under the rear seat. It's very large, the air temperature was 116 F with 15# boost last Monday. My new set up has the turbos mounted down to the side. The highest thing now is the air control valve. Stock cover fits now. That turbo setup in the picture is now in Check300 with water jacketed turbine housings.
Thanks, Tom
Thanks, Tom
Thread
Thread Starter
Forum
Replies
Last Post
soinc
Drives and Lower Units
44
05-27-2009 09:20 AM
