wheel mag lock removal
#11
Registered
Thread Starter
Join Date: Dec 2003
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Re: wheel mag lock removal
Torching sounds very exciting, but with my luck the boat might go up in flames-can't do that, the vessel is for sale.
Lubejobs42, thank you for the offer. I may take you up on the offer- I will pm you.
Great advise I will try them all-
Thanks All
Lubejobs42, thank you for the offer. I may take you up on the offer- I will pm you.
Great advise I will try them all-
Thanks All
#12
Platinum Member
Platinum Member
Re: wheel mag lock removal
Originally Posted by NASTY HABIT
done the socket thing ...worked fine
or borrow the kit mentioned above
#13
Registered
Re: wheel mag lock removal
Originally Posted by mattjtowne
Its actually $29 and its part number 52165...
The socket works too if you get lucky and get one to fit the lock right.. McGard's are always a strange size.. We use this all the time to remove locks...... The teeth bite in as it turns where a socket wont...
The socket works too if you get lucky and get one to fit the lock right.. McGard's are always a strange size.. We use this all the time to remove locks...... The teeth bite in as it turns where a socket wont...
29 bucks is cheap enough, who makes the kit??
#15
Registered
VIP Member
Re: wheel mag lock removal
Originally Posted by Scott B
Drive a cheap socket over the locknut, use a breaker bar to take it off...
It isn't pretty, but I don't quit until they're off.
The lock is no good anyway...
#16
Registered
Join Date: May 2004
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Re: wheel mag lock removal
air chisel. You don't have to cut / split the nut. Just cut a groove so the chisel has something to bite on and then turn the air chisel to drive the lock in the "loose" direction. 30 seconds, no purchase required.
#18
Registered
Re: wheel mag lock removal
Originally Posted by Dirck W Gomez
I have lost my key for my wheel locks on my trailer (dumb huh?) and was wondering if there is a trick way to remove without damaging my aluminum wheels. I have tried vice grips and they just slip off as the lock is tapered out. It is harden steel and I believe it is made by Mcguard.
Thanks
Thanks
#20
Registered
Thread Starter
Join Date: Dec 2003
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Re: wheel mag lock removal
Bought the tool from Sears, worked like a charm...THANK YOU
Lubejob42, thanks for the offer, I also now haved a set of my own
Now I can take the boat out...ya hoooo...gotta wait for the sunrise...just 6 more hours :-).
Lubejob42, thanks for the offer, I also now haved a set of my own
Now I can take the boat out...ya hoooo...gotta wait for the sunrise...just 6 more hours :-).