LubeJobs42

iTrader: (2)

My new carbs got here. They are so impressive. If anyone is looking for carbs you need to check these guys out!!! They are not that expensive for what they do. i was thinking of buying an extra one to put on my coffee table in the living room it's so pretty!!

CNC Machined Main Body for maximum air flow
CNC Machined Billet Boosters
MILLED throttle shafts provide up to an extra 10cfm from a stock throttle shaft.

Formula Outlaw

Now those are some serious looking gasoline squirters..

44MTI

What do they cost. and will they guarantee any gain in HP. My motors should be on the dyno late next week and I have been toying with getting some new carbs.

LubeJobs42

iTrader: (2)

These were $1250 ea. With shipping the 4 were $5110. They don't actually gaurentee any gains but say you will. They powdercoat them to any color for no extra charge.

This BIGS CNC 1050 HP Stage 7 RACE Dominator Features:
Heavily Reworked/CNC Machined Dominator HP Main Body for Awesome Air Flow
CNC Machined Billet Boosters
Multi-Circuit Metering
BIGS Race Modified HP Triple Stage Billet Metering Blocks for faster and Smoother Flow With Improved Idle Quality!
High Performance Non-Stick Gaskets For Fast and Easy Bowl Removal
Ultra-High Performance Race Floats For the Ultimate in Fuel Control
Ultra-High Flow Performance Power Valves
Ultra High Flow Needle and Seats
Screw in Air Bleeds for Extreme Tuning Ability
Four Corner Idle System
Secondary Jet Extensions with Notched Float for Uninterupted Power
Many of BIGS "In House" Modifications
Completely Assembled and Inspected By BIGS
Blue Printed
BIGS Exclusive "Platni-Blast" Heat, Fuel, and Abrasive Resistant Custom Finish!
Dyno Tested
Every NEW BIGS Receives Extensive Testing Before Being Shipped
We Will Custom Set and Finish This Carburetor For Your Application at NO ADDITIONAL CHARGE!!! Please Have Detailed Engine, Trans, and Rearend Specs on Hand.
BIGS has a No return/refund policy due to BIGS building to your specific specs/application

The BIGS CNC 1050 HP Dominator Stage 7 Is One of Our Most Powerful Creations. Our CNC 1050 HP Dominator Stage 7 includes our CNC Machined Main Body. Heavily Modified to Obtain Astonishingly Powerful Results With Improved Idle Quality! DETAILED VEHICLE INFORMATION WILL BE NEEDED FOR OUR BIGS CNC 1050 HP Stage 7 Dominators. We Have Seen Substantial Horsepower Increases With Our Modifications VS. Others!!!
Everyday We Receive Phone Calls and Emails from Our Customers Telling us About What an Amazing Difference Our BIGS CNC 1050 HP Stage 7 Dominators Have Made to Their Race/Street Cars and Their Race/Pleasure Boats. The BIGS CNC 1050 Stage 7 RACE Modified HP Carburetor has Become the Mainstream of Performance at The Track, on the Street and on the Water...World Wide! BIGS Performance Products is YOUR CNC HP Dominator Headquarters!!!