Hp 525 And A Whipple
#1
Thread Starter
Registered
Joined: May 2005
Posts: 4
Likes: 0
Has anybody had any luck with a whipple on an HP525. I just bought a new boat in Havasu and it ran great down there. The crappy part is I live at 6000 ft. above sea level and the boat feels too sluggish. I am considering a whipple but thought I would see what you all have done. Thanks!
#2
Registered

Joined: Dec 2000
Posts: 1,239
Likes: 5
From: Loto, MO
I heard there was a poor design on how the rev limiter works. It reduces fuel to the engine to reduce rpm. Not a good thing for a whipple setup. If you run against the rev limiter it will cut fuel and detonate.
Not sure if Whipple is fixing this one or not.
Rick
Not sure if Whipple is fixing this one or not.
Rick
#3
From what I have heard they can not crack the computer on the 525efi. There are replacing the hole thing when they put the Whipple on them . I don't know if they have figured it out yet .I just got finished installing some on my 500efis . they make Lot's of Torque!!
I would call Mark at Precision Marine in La.He knows all about it .
Also I am hearing that the heat exchanger may not be big enough
good luck
Rob
I would call Mark at Precision Marine in La.He knows all about it .
Also I am hearing that the heat exchanger may not be big enough
good luck
Rob
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.





